Search results

  1. I

    1991 K2500 SAS death wobble

    Have you swapped the SRW hubs back on to see if the problem is eliminated? With everything you have done seems like the problem could be the hubs. Are the bearing races seated properly? Spindle nuts/locks in good shape? Hubs new or used? Bent hubs? Sent from my SAMSUNG-SM-G890A using Tapatalk
  2. I

    Offroad bumpers

    Its .120 wall DOM which is PLENTY strong for a bumper Sent from my SAMSUNG-SM-G890A using Tapatalk
  3. I

    Offroad bumpers

    Nothing like custom bumpers! I've made quiet a few but only one for a GMT400, here's the last one I did for a buddy. Here's my favorite I built for a Tundra Sent from my SAMSUNG-SM-G890A using Tapatalk
  4. I

    No Start - Failing Indicator Bulb Test?

    And I'm only 25 to boot... Can't be a good sign, but it is a pretty quiet pump haha. Either way glad I don't have to undo my nice looming job! Thanks again! Sent from my SAMSUNG-SM-G890A using Tapatalk
  5. I

    No Start - Failing Indicator Bulb Test?

    Thanks for the response I believe I found the issue after taking a day off of the truck and then spending 30 minutes with it tonight. After all that wire chasing, diagram studying and thinking I have no clue what's going on with 12volts... One problem turned out to be swinging to many hammers...
  6. I

    No Start - Failing Indicator Bulb Test?

    Sent from my SAMSUNG-SM-G890A using Tapatalk
  7. I

    No Start - Failing Indicator Bulb Test?

    Hey guys so I am at the tail end of my Cummins/nv4500 swap into a 2000 GMC gmt400. I deleted the ABS computer, all the automatic transmission wires and engine related parts of the harness. I was very thorough and careful with what I chose to keep and remove. I went to crank it for the first time...
  8. I

    Cummins Swap - in need of a wiring guru and a few diagrams

    You are probably right. I found the C100 which has been posted many a times. I just purchased the alldatadiy.com for my truck to help with this process and give back to anyone else who needs help. I am trying to locate all the wires the come through the P100 pass through grommet and the P101...
  9. I

    Cummins Swap - in need of a wiring guru and a few diagrams

    I found the C100 pinout on this site with some hard searching. Still looking for the C200? and C203? connectors!
  10. I

    Cummins Swap - in need of a wiring guru and a few diagrams

    Hey guys first time posting here but have been reading around for years. Love this site full of all types of info. Hope this is the right place to post this topic. I have 2000 2500 GMT400 and am in the middle of a 12 valve Cummins swap. I have all the pinouts for the PCM and a Chiltons Manual...

Latest posts

Staff online

Members online

... and 30 more.
Total: 1,811 (members: 80, guests: 1,731)

Forum statistics

Threads
64,392
Messages
1,392,992
Members
51,564
Latest member
MikeC675

Share this page

Top