Search results

  1. tylers88

    Nbs or nnbs wheels on 305s

    When you crank again you'll need another alignment, rule of thumb is safely cranked is 2 or 3 ribs on CV boot touching(can't remember but want to say 3), 1 ton front calipers and a NBS master cylinder are pretty common brake upgrades too and there are write ups on those just understand when you...
  2. tylers88

    Which is better a aal or 3/4 ton leaf springs?

    What about a helper bag setup
  3. tylers88

    Nbs or nnbs wheels on 305s

    Lift either suspension or body so you don't have to crank so much the front end hates life, gears 4:56 or 4:88 and brakes. A lot of guys don't do gears for 35s but quite a few are the same guys that complain how weak 700s and 60Es are. It puts a lot of stews on the transmission without them due...
  4. tylers88

    rebuilding the front end on my 98 Tahoe 4x4

    Bilstien 4600(yellow bodies) will be fine with a couple inches of crank
  5. tylers88

    Info on NV4500

    I understand that, my Rubicon might not be a power house but with a 4.46 1st gear, 4:1 lowrange tcase and 4.10s I am at like 3mph at around 5200rpm lol, the front and rear air locked D44s are cool too. Back to the thread tho, OP you said this is going in a 454 SS why not a t5 or t56?
  6. tylers88

    My 1996 Centurion CCSB

    Looks good so far but needs more low, 4/6 with your 20s you have already and roll out.
  7. tylers88

    Looking for aftermark wheel ideas

    stocks are 16 yes, look up Mickey Thompson Classic IIIs
  8. tylers88

    My 88's build thread

    Plans changed again, I am going to be going with a 4-6 Superlift(solid kit, 5" diff drop from what I have read) that comes with 5100s and instead of blocks going to go with some Pro Comp 3" leafs(supposed to be great riding), set the angles flat at 5" be level but clear(I hope anyway) 315/75R16...
  9. tylers88

    How do you know if your truck originally had keyless entry?

    Really, almost every late 400 I have seen with power has keyless entry. At least around here.
  10. tylers88

    LED headlights for W/T front

    That is one thing I miss about my NBS with 6 hi mod, could see road for between 1/4-1/2 mile and lit up signs for just over a mile. Been thinking about getting trucklights for jeep so im going to stay tuned on how they last for you.
  11. tylers88

    99 chevy k2500 ccsb speakers rpo UQ3

    I would ditch the 4x6s. Probably leave them and just unhook, 5.25s produce better sound all together even cheap 5.25s vs good 4x6s, wiring speakers up is simple. I would run decent 6.5 components in front and coax 5.25s unless 6.5s will fit in the back too.
  12. tylers88

    Stereo system

    Mine in my 88 POUNDED in high school, Alpine headunit, Polk 4x6 speakers in the dash, 5 1/4" Rockford components in custom pods on top of my sub box, MTX4244 4 channel amp for the speakers, 2 MTX Thunder 6000 12"s(1 cu. ft. per sub, yes it can be done with plenty of room to mount 2 amps behind a...
  13. tylers88

    total replacement wiring harness

    The engine harness wouldn't be bad from painless if I decide to stay with the tbi but I am looking for a chassis harness.
  14. tylers88

    total replacement wiring harness

    The 400s are old enough and have a big enough following I would think there would be a entire replacement harness out there but Google failed to find anything, figured I'd ask here. Does anyone know of one and if so could you post the link?
  15. tylers88

    1500 and 2500 have the same control arm bushings...really?

    Means one of 2 things they either under built the 2500 or over built the 1500, im going with the 2nd just on my experience with my 88 1500 and the pure torture I put it through.
  16. tylers88

    Rough Country 2-3 inch suspension lift vs 4 inch suspension lift

    SBW, Steam Boat Willy(trucks name lol) was so fckn clean. I was trying to sell my car when it went up for sale, wanted to buy it.
  17. tylers88

    Driving in 4Hi

    I have done 4wd ties in the snow, speedo said 80+ in my old 04 crewcab but actual truck speed was at most maybe 25-30 in a VERY fast circle lol.
  18. tylers88

    4HI doesnt engage

    If it doesn't im going to rig up a switch for it because if I jump it it engages, I will be rebuilding the tcase this summer anyway so maybe ill find the real problem, I hope to have a 5.3/60E combo in it this summer so I want everything working so I can start dding the obs.
  19. tylers88

    Wheel backspacing

    I will edit this with pics when I get home from work but I had 16x8 4.5" BS (0 offset) ar nitros and they stuck out about how far you want looked really good just out side the fender. I also had a set of 15x8 with 3 5/8" BS and with just a 10.5 the tires stuck out pretty far. I'll also throw a...
  20. tylers88

    4HI doesnt engage

    So im digging this back from the dead, the truck would engage 4 lo just fine but not 4 hi. Im planning an ls swap soonish to have a truck again since I sold my 800 crew cab. 4wd would be nice to have working. My question is do I have an internal problem with the t case or is it really just a $13...
  21. tylers88

    Tire size question

    I hate those charts, why is better mileage on there all the way up to 44s, please tell me one person that runs anything over a 35 and expects decent mileage out of it
  22. tylers88

    GMT800 suspension components on 400?

    Thanks for the links but that guy has a 3500, I'm working with a 1500. Still read through, pretty sweet.
  23. tylers88

    17" RIms and tires on a 88 Stepside?

    those should fit with a +10
  24. tylers88

    any downside to bump-stops?

    My rubbing issues were all when turning not the many times I aired my 88 out when it was on 33s
  25. tylers88

    Help me decipher this lol (body lift/roll pan laws...)

    Lucky to get away with tint. I did for 2 years then 2 tickets in 16 days at $127.50 each, 70% (stock) is limit I had 12% lol. Lift here is max height and max width if its smaller than 13'6" x 8'6" and has lights its legal.
Top