Search results

  1. LostX

    Question on Rear O2 and Catalytic Converters

    Long term trims are always around 15% (adding 15% more fuel). When the LTFT reach 20 is when it throws a code, which rarely happens. I'll try to take a video of what the scanner says all 4 O2 sensors are doing in closed loop.
  2. LostX

    Question on Rear O2 and Catalytic Converters

    The truck does have a lift kit, but the drivetrain, engine, trans is all stock. Someone put a dual exhaust on a long time ago judging by the broken welds and corrosion on the exhaust. I've owned the truck for 5 years and frequently check with a handheld and have never seen a rear 02 code. I...
  3. LostX

    Question on Rear O2 and Catalytic Converters

    So a little background on the truck is its a 96 model k3500 with the 7.4 vortec engine. My issue is that at some point some previous owner gutted both catalytic converters (they are hollow). I am planning on redoing that portion of the exhaust with new catalytic converters soon. The issue i have...
  4. LostX

    96 Tahoe dies while driving and won't start

    Pull the distributor and look at the gear. It probably skipped a tooth.
  5. LostX

    Front end noise. Advice needed

    Glad it worked
  6. LostX

    Front end noise. Advice needed

    Also before you do that id suggest removing both shocks from the front and driving it around the block, then let us know if the noise is gone.
  7. LostX

    Front end noise. Advice needed

    Most likely cause is a small gap between where the shock bolts go into the shocks. Try swapping out the metric bolts with the next marginally larger SAE bolt that will still fit into the shock mounts. I had the same front end noise and this is how I fixed it, the problem is from that the...
  8. LostX

    CV Bolts are missing, anyone know what size?

    I had a few missing from mine, I just pulled 2 from a truck in the junkyard, they match the rest of the bolts so it doesn't look like I got them in a hardware store.
  9. LostX

    Weathertech for GMT400 CK1500?

    Yes the front floor mats from weather tech are a direct fit. Also if you have a crew cab like my truck, the rear suburban floor mat fits there as well.
  10. LostX

    Crew Cab Headliner

    I did mine pretty easily, remove the front seats and center console and pull it out through the the passenger door. You can easily pull it out and install it by yourself
  11. LostX

    Catalytic converter setup with true duals

    It's a 96 vortec 454.
  12. LostX

    Catalytic converter setup with true duals

    I am trying to get my exhaust setup properly and some weird stuff is going on after the previous owner converted it to true duals. If I look under the truck there are 3 Catalytic converters, 1 on the drivers side and 2 on the passenger side. I assume on the original exhaust the 1 extra cat...
  13. LostX

    LostX's Black CCLB 454

    So I soon will be selling 1 ton springs with 4 in blocks. I also have a brand new aluminum diff cover for an 8.5 10 bolt from ta performance that I will try to sell soon. ( ordered the wrong one for my trans am)
  14. LostX

    LostX's Black CCLB 454

    I picked up 5 original h2 wheels with the factory chrome. I'm going to hold onto them for a while until I get the suspension set up where I want it and the front end aligned. My goal is to ditch the 4in blocks and install procomp 5.5in lift springs, crank the tbars up to match, then get it...
  15. LostX

    LostX's Black CCLB 454

    No vibrations is the driveline, I just took it on a 2000 mile road trip and it felt great.
  16. LostX

    LostX's Black CCLB 454

    Here are the driveshaft angles. The pinion angle is slightly negative from the looks of it.
  17. LostX

    LostX's Black CCLB 454

  18. LostX

    2000 old body K3500 lift

    I have the same truck k3500 crew cab long bed with 2 piece driveshaft. Mine is sitting on a pro comp 6 in lift kit with 35 inch tires on 20 inch rims. I have towed with it just fine.
  19. LostX

    Aftermarket gas gauge hook up?!?!?!?

    If the degree of sweep is the same from the stock guage to your new guage, you can attempt to install it in the stock location. If I were doing it, I would use the original guage overlay and original needle, but swap the guts of the new guage over into the stock location, it will take some...
  20. LostX

    Tan tool tray from behind rear seat on 96 crew cab. $5 bucks plus shipping

    Do you happen to have the mounting bolts as well as the removable tool tray part
  21. LostX

    LostX's Black CCLB 454

    New headliner, restoring visors, and random dash pic.
  22. LostX

    Steering boxes 2wd vs 4x4

    After weeks of searching threads I couldn't find a solid answer. Will a 2wd steering box fit onto a 4x4? Here is my background, my truck is a 4x4 k3500 with hydroboost brakes powered by the power steering pump. I would like to go to the junkyard and find a low mile steering box from a 2wd to...
  23. LostX

    Cab leak

    I have the same leak above the drivers feet near the parking break, here is what I found. The picture I took is looking through the cowl from the top toward the drivers side corner. There is a large rectangular hole and I can reach my hand into the cab, what is missing here?
  24. LostX

    Help me identify mystery connectors

    I'll start with some background about the truck. It's a 1996 k3500 silverado. The vin says it's an l29 454. The motor has been swapped with an identical l29 vortec 454 by the previous owner. I'll start with this first connector. There are 2 wires. The colors are yellow/black and black. The...
  25. LostX

    Steering Play

    Have you adjusted the backlash out of your new steering box

Latest posts

Members online

Total: 1,221 (members: 45, guests: 1,176)

Forum statistics

Threads
64,335
Messages
1,391,504
Members
51,440
Latest member
lolxnico

Share this page

Top