Search results

  1. DAGEN

    Sputtering problem solved and now i need some assistance.

    The problem turns out that my fuel pressure regulator is shot. Hooked up a gauge, turn key on and crank im at 58 psi idle holds at 58psi but I shut it off and it drops to 20 psi in only a minute. Knowing I need a regulator and the work involved in swapping that, i'm trying to figure out what...
  2. DAGEN

    Weird sputtering plague.

    I'm having a weird sputter once my truck warms up to running temp. I thought I had it fixed when I installed a accel cap and rotor it ran great for about a week and a half. Before it always did it around 50-55 mph at 2000 rpm. Now its doing it around 2200 rpm and getting worse. Could it be my...
  3. DAGEN

    brake lights acting up.

    The easiest way to describe my problem is this, when I apply my brakes like 1/8th of the way they light up, however if I press past that they go out, my license plate lights, reverse, and parking all work fine. I replaced the brake light switch up under the dash, regrounded the harness...
  4. DAGEN

    brake lights not working correctly, swapped to new switch, still issues.

    As stated my brake lights are not operating correctly. When I hit the pedal 1/4 ish they come on fine, add more pressure they go out. I figured ok, brake switch under the dash, removed replaced with new and still the same issue.... mmmkk, now im stumped. What else should I look for? I am sas'd...
  5. DAGEN

    Trans number 3, toast?

    Well it seems I may have cooked another trans. Shifts perfectly fine until it get's warm, than from 1st it shifts to 2nd and gets a shudder at low rpm, seems fine in 3rd until you lay half throttle than it slips and OD becomes non existent. The trans has roughly 15k miles on it and was built by...
  6. DAGEN

    Hard acceleration sputter....

    I have a 97 chevy with the vortec l31 350. The truck runs great driving around town cruising etc, however when i mat it to WOT around 3200 rpm it has a very noticiable stumble then carries on thrue the RPM range. Anyone else have this happen? Not throwing any code's and i always keep the tune/...
  7. DAGEN

    Added some new stuff to the truck.

    The truck still need's paint and those fugly hook's removed from the sides, but it came a bit farther since this spring, tint, hood, fog light's, inserts, diff covers, dual shock, rim's, tow mirror's etc. Onto some pic's.
  8. DAGEN

    3rd brake light filler for 97 chevy

    i've hunted on google and cant seem to find one. Does anyone know were i can get one of these? I going to start body work on my truck and want to shave it. Thank's
  9. DAGEN

    updates on the truck

    Well as some of you know i didn't know which route i wanted to take with the truck. I searched around for a set of predator 8's and found some. I've still gotta install the FTS chrome shock's with reservoir's and put a nbs rear bumper on it along with some tint and get the 4x4 wrapped up. Also...
  10. DAGEN

    decided to switch rim's again, these are the option's i've narrowed it to.

    I decided that i want 20x12's on my truck and am either going with 38x15.50 or 37x13.50 tire's. Keep in mind it is on 37x12.50 with 17 inch wheel's now. These are the wheel's i've narrowed it down to. I'm really leaning toward's the xd diesel's.
  11. DAGEN

    Water pump pucked today......... any opinion's on E-FANS?

    Well after taking care of the miss my truck was having and doing a bunch of other stuff to it, The water pump gave up the ghost. I'm wondering if i could do a electric fan conversion fairly cheap while im swapping it out. Any ideas other than the Flex-a-lite one?
  12. DAGEN

    The Krakin' build thread.

    I decided it was about time to post up a thread of how my truck started it's life when i bought it about 5 years ago up to the point im at now. I'll post all the pics from start to the current point im at. This is when i first bought the truck. It looked like a bit of a hoopdee but i knew...
  13. DAGEN

    I decided it was time to do a lil work on the truck.........

    I was getting sick of breaking the IFS part's on my truck so i solid axle and "ton"d it. I'll post a build thread up tomorow or something as i put a completly new exhaust under it earlier today along with the front shock setup... PLEASE NOTE, i did not put the gay hook's on the bed sides and...
  14. DAGEN

    1'' body lift question

    Hey all, i dont post too often on here but figured maybe someone could answer this. I just sas'd my 97 and no longer need 3" of body lift. I would however like to just buy some 1" body lift spacer's and go that route. My question is will i need the steering extension on the 2 and 3 inch body...
  15. DAGEN

    Best rear lift springs.

    I'm ordering a set in either a 5.5 or 5 inch lift for the rear of the 97 and am wondering what most of you guy's are running and what you recommend. currently i've just got the add-a-leaf 4 inch block setup from back in the day when i was running the rcx lift.
  16. DAGEN

    some updates on the truck. PICS inside!

    Well i decided to throw some new tires on the truck. was thinkin ill take off the body lift and run some km2s in a 35. Well sorry to say but the bug bite me. I ended up tossing in new 1 ton tbars control arms and 37/14 IROKs with 15/12 mickey thompson classics. Threw alot of other stuff on too...

Latest posts

Members online

Total: 923 (members: 21, guests: 902)

Forum statistics

Threads
64,299
Messages
1,390,805
Members
51,358
Latest member
1993 Suburban c1500

Share this page

Top