Search results

  1. 1994chevymanual

    aftermarket fuel pump?

    okay guys i need a higher than stock fuel pump for my engine. i have a 350 making around 360-370 hp was wondering what i could do for a fuel pump would like one that would just connect to all my stock lines and sending units. only need 25 or so psi also have a self learning throttle body
  2. 1994chevymanual

    coilover lift kit?

    i dont really want to do a SAS but i would like to do a IFS with coil overs. Does anyone make a kit for it i figured it would cost 2000 to do it its a 1994 k1500
  3. 1994chevymanual

    billet grill emblems?

    alright guys i just did a gmc grill swap with the billet grill insert i was wondering if anyone knew where i can get a custom badge made to clip bolt to the billet insert. I dont mean a chevy emblem, i mean like a z71 emblem on the new trucks, 350 custom badges, or off road (for example)
  4. 1994chevymanual

    gap between box and cab cab mounts cause this?

    so on my 1994 RCSB my gap at the top of the box and cab is narrow and at the bottom of the cab and box its a lot wider almost over 1/2 of an in of difference and is getting worse. However, the body lines are still pretty close to being lined up properly. Any ideas ????
  5. 1994chevymanual

    New exhaust for mild built motor??

    I am building my motor right now and was wondering what exhaust i should go with. Its a 350 with port polished vortec heads, roller cam, flat tops ect. It will make roughly 350 HP and 370 tq. Its going into my 1994 k1500. what set up should i go with true dual, single, cat back adn what size...
  6. 1994chevymanual

    ideas, please help

    I want to clean up the over all look of my truck to give it a more "clean cut look", but i really dont know how....... my ideas are bellow -level it out with 285s -ditch tool box and put a roll tonneau cover on it -swap my w/t grill for gmc grille -cowl hood pictures of my truck right now are...
  7. 1994chevymanual

    330 hp build tips

    alright guys i have my donor engine stripped down. I am leaning towards a set of vortec heads for my build. I know cam specs and other variables will impact what i want to know but i was wondering. 1. how good are they for low end mid range torque? 2. are they worth porting and polishing 3...
  8. 1994chevymanual

    Four wheel drive diagnosing?

    Hey guys I have a 1994 Chevy Cheyenne with nv3500 4x4 on the floor and it won't engage nothing lights up. Anyone have any ideas?
  9. 1994chevymanual

    how screwed am i?

    so i busted my chrome trim on my GMC grille i got for my swap. Is there anyway i can get just the new chrome trim that goes around the insert?
  10. 1994chevymanual

    Where to get a GMC Grill?

    Alright i can not find a used grill anywhere in my area. Where is a goodplace & brand to get for my grill swap? I have been thinking about getting one from rock auto,but my concern is fitment i want this to look right. Any input is appreciated
  11. 1994chevymanual

    GMC grillfor my cheyenne

    http://www.ebay.com/itm/94-02-GMC-C-K-PICKUP-COMP-GRILLE-BLK-HEADLIGHT-PARK-7PC-/201243251676?fits=Year%3A1996%7CMake%3AGMC%7CModel%3AK1500%7CSubmodel%3ASierra+SLT%7CEngine+-+Liter_Display%3A5.7L&hash=item2edb0853dc:g:6eUAAOSwuMFUkCMj&vxp=mtr What do you guys think of this for my grill swap...
  12. 1994chevymanual

    This lift and tire combo i found....need input

    This guy has a 4 inch lift and 285s. However i have never seen a 4" lift with 285s look this good. What do you guys think? does he not have it cranked all the way up for all 4 inch lift?
  13. 1994chevymanual

    Grille swap?

    alright guys i have the Cheyenne grille on my truck and want to swap in a GMC sierra with a billet insert. Now im asking what else i need to do this swap. I will need grille, headlights, and blinkers. Now where do i get the mounting hardware for the headlights? and where do i get the wiring...
  14. 1994chevymanual

    need a new muffler

    alright my Flowmaster original 40 has a few exhaust leaks and i cant stand the tick in the exhaust anymore. Over all i am happy with the sound and the low pitch "rumble" it gives off. However, i am looking for something that gives of a good low pitch aggressive rumble like i have but want it to...
  15. 1994chevymanual

    exhaust manifold prep??

    okay i am going to be taking off my exhaust manifold to replace the gasket. I have some questions though. What can i do to help go as smooth as possible meaning prep work like soaking everything in pb plast, warming it up first?? any pointers in removing manifold will be extremely appreciated...
  16. 1994chevymanual

    custom bench seat

    so my bench seat needs to be redone. I am a little lost when it comes to upholstery material on what kinds and types are out there. So my thoughts are i need a material that will look good and breath because it is my Summer driver and it does not have A/C. What kinds of material should i be...
  17. 1994chevymanual

    what about these headers?

    im not sure where to post this but what do you guys think about these headers with a 1.75" tube http://www.amazon.com/92-95-305-350-Stainless-Exhaust-Header/dp/B0045LLSNS Do you guys think they are worth it?
  18. 1994chevymanual

    better look advice

    ok go to my build thread in my sig for pictures, but i am wanting more of a rugged look/off road look Without lifting my truck. I am thinking of a 1.5" crank and 285s on the old girl but want some advice on what else to be done to help achieve that look. thank you!!
  19. 1994chevymanual

    350 tbi torque how much can i produce?

    hey guys look at my sig for information but i have a 350 tbi and i haul a boat around and an enclosed trailer from time to time and i want more of a fun dd as well. I want to keep it a 350 for gas millage but how much torque can i make with a stock bottom end i would like to be around 360...
  20. 1994chevymanual

    federal mud tires ?

    SO i want to bump up to an aggressive 285 mud tire for the old girl and i was wondering if anyone has experience with Federal mud tires good bad? any input would be great!!
  21. 1994chevymanual

    what hood if any??

    hey guys i want to do a hood next spring and i cant decide between the ram air look or a 2" cowl and i need/want input. Next does anyone have a picture or know of a obs truck with this hood? or any threads that have pictures of this...
  22. 1994chevymanual

    which lens on a black truck??

    i will be putting cab lights on my black 1994 for chevy soon. I am torn on what color lens i should go with. i am torn between a orange lens and the white lens! if i go with the white lens will it still be a orange glow when they are on?? any input will be appreciated and any pictures as well.
  23. 1994chevymanual

    350 tbi mods worth it?

    okay i have a 1994 chevy 350 tbi. i am naive when it comes to the throttle body world and unit it self. I was wondering if it is worth it doing to a stock 350? I have my eye on this aftermarket tbi on ebay (...
  24. 1994chevymanual

    nv3500?

    I have a 1994 chevy 4x4 with a 350 tbi manual. I believe the truck has the nv3500 transmission and not the t5 borg? i dont have the truck at my house right now. Any help please?
  25. 1994chevymanual

    1994 chevy Cheyenne build

    okay now that i figured out the photo issue i can get my real thread under way. It is a 1994 chevy Cheyenne with a 350 tbi manual transmission and four wheel drive. I bought the truck 4 years ago and want to show where it started and where it is at now. below is what the truck looked like when i...

Latest posts

Members online

Total: 1,352 (members: 25, guests: 1,327)

Forum statistics

Threads
64,253
Messages
1,389,890
Members
51,246
Latest member
robert2386

Share this page

Top