I've got a 97 k1500, the carpet sections on the door panels are killing me. Any advice on dying or potentially wrapping those sections to make them look better would be great. Thanks!
I am really looking into running Magnaflow mufflers, I have the magnaflow cats currently. I know these mufflers are more performance based, but I do want some sound. Any advice a set of magnaflows to get?
I have the 5.7 currently with true duals and Insynerator mufflers and magna flow high flow cats. The mufflers are ok, pretty quiet. I am looking for more sound but not too throaty. thoughts on some good mufflers?
So the amps are connected directly to the battery. And I was just playing music as usual and all of a sudden I had no audio. Maybe I did blow the fuse in the head unit? It's a double din, I just had put it a few months ago
I have an ext cab K1500, with aftermarket Rockford Fosgate speakers wired to a 4 channel amp, also have a monoblock amp for 2 subs. neither amp is getting power. The radio powers on fine, just no audio at all. Thoughts?
Thanks
So i ended up getting these for the doors and the rear:https://www.amazon.com/Rockford-P1650-6-5-Inch-Compatible-Speaker/dp/B00VVMHA90/ref=pd_sbs_107_1?_encoding=UTF8&pd_rd_i=B00VVMHA90&pd_rd_r=HYKNSP92ZVBPZBXXSA4V&pd_rd_w=YUeB5&pd_rd_wg=tN74Q&psc=1&refRID=HYKNSP92ZVBPZBXXSA4V
Any thoughts on...
and sorry here's the link i was looking at
https://www.amazon.com/Rockford-Fosgate-P1462-6-Inches-Speakers/dp/B001P86SQG/ref=sr_1_1?ie=UTF8&qid=1514822239&sr=8-1&keywords=4x6+car+speakers
How much did they run you?
And the front and rear are both 6.5 inch speakers correct?
And I am looking at these currently:
https://www.amazon.com/Rockford-Fosgate-R165X3-6-5-Inch-Full-Range/dp/B00BF6HWCM/ref=sr_1_1?s=car&ie=UTF8&qid=1514513240&sr=1-1&keywords=6.5
I am looking to replace my aftermarket single din radio with a double din. I am looking for a good double din with apple capabilities and good for my amp and sub woofers. Any advice, thanks!
I did lay on the ground and try to access the bulb, but there are 2 small screws holding tabs that keep the bulb in place and there is no room to get even a small screw driver in there. Are taking the housings out very tough?
Thanks for getting back to me!
So I got the bumper mounted and everything by a local body shop. And now I have the LED bulbs to put in. There is very little access to get undo the screws to put the new bulb in. Would taking the grill off help? or any advice?