Found them: http://www.airbagit.com/mobile/Category.aspx?id=1616
I just skimmed over the site, but didn’t immediately find the 88-98 Bumpers. The prices are lower here though.
Aftermarket bumper selection
- Thread starter 97redz71
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Found them: http://www.airbagit.com/mobile/Category.aspx?id=1616
I just skimmed over the site, but didn’t immediately find the 88-98 Bumpers. The prices are lower here though.
laidbackbigun
I'm Awesome
They certainly are lower. Have you purchased from them before, and I wonder if the quality is still therE?
Also, this is the what I'm looking for correct?
http://www.airbagit.com/mobile/Product.aspx?ProductCode=BUM-CHE-045
The website is poorly designed, and it looks like the bumper does not come with lenses?
http://www.airbagit.com/mobile/Product.aspx?ProductCode=BUM-CHE-045
The website is poorly designed, and it looks like the bumper does not come with lenses?
laidbackbigun
I'm Awesome
I ordered air bag parts and mirrors for a ford ranger but haven't order anything like that.
ima93chevyguy
Zip-Tie Mechanic
Ah that's the bumbers that i remember, i thought someone else made them i guess i was mistaken.
That should be similar to the one on this tahoe i looked at a couple of years ago. Sorry that this is the only pic i have.
The only thing i remember was the lights were verrrrry dingy looking and it just looked cheaply made. I mean design wise it looks very similar to an LMC one. Depends on how you take care of it i suppose. If you dont mind some polishing and cleaning I would say it wouldn't really matter. I bought the LMC one because i felt confident in buying it and knew it would be good quality and it has been.
That should be similar to the one on this tahoe i looked at a couple of years ago. Sorry that this is the only pic i have.
You must be registered for see images
The only thing i remember was the lights were verrrrry dingy looking and it just looked cheaply made. I mean design wise it looks very similar to an LMC one. Depends on how you take care of it i suppose. If you dont mind some polishing and cleaning I would say it wouldn't really matter. I bought the LMC one because i felt confident in buying it and knew it would be good quality and it has been.
Dubs
I'm Awesome
I just ordered the below for mine. I couldn't get the lights in the bumper so go down far enough. My bumper is level as well. So if I point the bumper down more it'll look off.
https://www.amazon.com/gp/product/B06XW4P7N2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B06XW4P7N2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
ima93chevyguy
Zip-Tie Mechanic
the fog lights bolt on to these little tabs with one bolt. you can easily bend the tab up or down and there is a good bit of room in the fog light hole to move side to side as you need. you can also slide it front to back some. i would suggest doing all of that before you put the grille back on as the bolts are easily accessible that way. my passenger is far right as it will go and driver shines down centerline.
just a forewarning those fog lights will probably be pretty dim, i installed HID's into mine and they work great.
You can PM me if you need anything specific
Similar threads
