how to bypass the security
- Thread starter 98vortec
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
^ They can, and that's what I'd recommend. Get in touch with Black Bear Performance and get a tune. It'll cost you a couple hundred dollars but they can eliminate the PassLock entirely and your truck will be much more fun to drive.
skylark
I'm Awesome
$0.97 at RadioShack for a 2.2k ohm resistor. There are three wires that run to the ignition switch that are grouped together. If I recall correctly they are orange black and white. If it isnt orange then it is yellow. All you have to do is wire the resistor across the black and yellow or the orange and black and do a relearn. A relearn consists of turning the key on fire it up let it die and leave the key on. The security light will flash and stay on. After 10 minutes shut off the key and repeat. Do this 3 times and it will learn the 2.2 K resistor as the new resistance for the ignition switch. Make sure you solder the resistor into place.
Eskimomann209
I'm Awesome
- Joined
- Jul 22, 2014
- Messages
- 618
- Reaction score
- 217
0411 pcm swap
Tuned for your rig and passlock vats deleted
Tuned for your rig and passlock vats deleted
eyesi
OBS Enthusiast
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
skylark
I'm Awesome
You are correct! The memory was fuzzy without a schematic in front of me.
jasons99hoe
OBS Enthusiast
have you just done the re-learn? Skylark what does the resistor do? i had to do a re-learn on mine from dissconnecting the battery for 2 weeks while i worked on it. i didnt need a resistor though, just did the re-learn and it worked. im curious.
Similar threads
