Help needed on dually fenders

this may sound like a stupid question but after trying 10 different ways i cant seam to get the support rods to line up. i changed beds and swapped over my dually fenders onto a SRW bed. i made a template off the old bed and everything lines up perfect, the inner wheels wells and all. but the 4 support rods for the fenders are not working, the angles are off and they just don't fit. i still have the old bed and the location of the holes are the same, dose anyone have a photo of there's? ive searched online and found nothing. i'm thinking maybe im missing a bracket or something. this project have been down for 3 years and i cant remember back that far ha ha. so i just need a quick photo of the rods connected to the dually fender and the bed, thanks




here a photo of my truck so far

Not sure exactly for the dually bed, but I would just make it work. They're there for support only, so long as it is sturdy, you'll be fine.

Alternatively, take a crap load of pics and some measurements of the position relative to a given point. Then hit up a junk yard and see if you are missing something or if the holes are indeed off.

Well I feel stupid. The rods I was trying to use were off the srw bed ha ha I had them labeled the same way and today looking through my other box of parts I forgot about I found the correct ones.


Sent from my iPhone using Tapatalk

What mirrors are those? Your truck looks cool!

Bondovw said:

What mirrors are those? Your truck looks cool!

Click to expand...

They are dodge mirrors. Just had to do some cleaning up on the edges to fit.


Sent from my iPhone using Tapatalk