Bagged break lines

NOLA_SoLo · Sep 16, 2017

I just bagged the front and the break lines are hitting the dim 2" drop spindles, what are you guys doing for break lines

You must be registered for see images attach

laidbackbigun · Sep 16, 2017

Hitting where? are your still attached to upper control arms?

NOLA_SoLo · Sep 16, 2017

The break line that comes off the caliper is hitting the spindle, no I have mmw arms and they don't have a spot to connect the break lines too

laidbackbigun · Sep 16, 2017

Oh. That's a weird issue. Haven't seen that one come up. Someone help this man out

jmig · Sep 17, 2017

You must be registered for see images attach

Just carefully bend it away from the caliper until it clears. So you don't have the mounting holes to attached the factory bracket to the MMW arms?

NOLA_SoLo · Sep 17, 2017

I have the jeebus joint arms, they didn't come with the holes to mount the line, I'm probably just gonna zip tie it or drill my own holes

DRAGGIN95 · Sep 18, 2017

I use a small block of wood and rubber hammer to slightly bend them out of the way, same for static drop with spindles, works every time.