Interesting issue..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dhumboldt12

I'm Awesome
Joined
Mar 16, 2017
Messages
221
Reaction score
14
Location
US
That's a great idea. I will check the mount out tomorrow. How do you adjust the linkage?

Sent from my Nexus 5X using Tapatalk
 

dhumboldt12

I'm Awesome
Joined
Mar 16, 2017
Messages
221
Reaction score
14
Location
US
A little update. I put the truck into drive, so no overdrive, and romped it from a dead stop, and it didn't have a problem. But then I did it in overdrive, and it had the same problem.

Sent from my Nexus 5X using Tapatalk
 
Joined
Jun 9, 2017
Messages
25
Reaction score
16
Location
Florida
Not sure if the shifter would be similar but on my 99 the column shifter itself doesn't fully go into the detent for the OD position, it needs to be pushed lightly toward the dash to fully seat and if not it will usually "pop" fully into the detent going over a bump or such while driving. Maybe yours isn't seating which allows it to pop out?
 

dhumboldt12

I'm Awesome
Joined
Mar 16, 2017
Messages
221
Reaction score
14
Location
US
Hmm. That's possible. Because if I go over some bumps while giving it not quite half throttle, it'll pop out. So I will check to see if it goes all the way into the slot for overdrive.

Sent from my Nexus 5X using Tapatalk
 

dhumboldt12

I'm Awesome
Joined
Mar 16, 2017
Messages
221
Reaction score
14
Location
US
Little update: going over big bumps causes it pop into neutral as well. Ideas? Loose shifter bracket?

Sent from my Nexus 5X using Tapatalk
 
Top