"Cold Air" build. Modified stock breather.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JMiller

OBS Enthusiast
Joined
Oct 16, 2016
Messages
80
Reaction score
14
Location
58341
Patched in hole on stock breather. I think the stock breather is more of a cold air intake than anything you can buy. My welds aren't the best but it's welded. The paint looks great though. Used single stage 8555 we had hanging around the shop.

You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

JMiller

OBS Enthusiast
Joined
Oct 16, 2016
Messages
80
Reaction score
14
Location
58341
I skipped a few steps with the picture. I had to do some scuffing after using the paint stripper. Then sprayed a coat of black sealer followed by a few medium wet coats of 8555 GM Black.
 

JMiller

OBS Enthusiast
Joined
Oct 16, 2016
Messages
80
Reaction score
14
Location
58341
You must be registered for see images attach


Forgot to post the picture of the lid
 

JMiller

OBS Enthusiast
Joined
Oct 16, 2016
Messages
80
Reaction score
14
Location
58341
I'm going to see if I can't dig up a V6 tube from behind the shop today. We have a virtual grave yard of cars. They go back there and never leave.
 
Top