Does Anyone Have Polyurethane Body Mounts?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeff7

OBS Enthusiast
Joined
Apr 21, 2015
Messages
78
Reaction score
7
Location
Alberta, Canada
The only discontinued part when I asked was the upper cushion for the 2 rear mounts. My plan is to put GMT900 rear mounts when I do it though, there's a thread here somewhere with a write up and part numbers, if you want to check it out and can't find it let me know, I have it bookmarked at home.
 

low4x4

backyard mechanic
Joined
Jan 5, 2010
Messages
605
Reaction score
48
Location
Mass.
I installed the energy suspension complete kit in my lowered 95 ecab 4x4, including control arms, rear spring bushings and motor mounts...10 years ago. wouldn,t change a thing. they tightened up sway and body roll
 

CrustyJunker

Is STILL Here?
Joined
May 20, 2012
Messages
553
Reaction score
382
Location
Indiana, USA
ZAP! Finally done. All new bushings are in, doctored up the rusted frame mount, made an upper retainer from scratch (very time consuming with limited tools), attempted patching up another upper retainer (should've probably built another one), and replaced a lower retainer cup. I'll fill you guys in on how it rides later!
 

CrustyJunker

Is STILL Here?
Joined
May 20, 2012
Messages
553
Reaction score
382
Location
Indiana, USA
Finally got a test drive, to tell the truth I don't feel a major difference between the poly and the rubber. If I have my left foot flat on the floor, I could feel maybe a little bit more medium frequency vibration. But as far as ride in the seat and feel in the steering wheel? No difference.

-This is on a 4x4, torsion bars cranked, body lift, riding on Wrangler MT/R's, and Rancho RS7000MT shocks.
 
Top