Non canceling turn signal

rlast1 · Feb 26, 2017

Decided to fix my left turn signaling no canceling problem today. I bought the tool to remove and install the snap ring and replaced the turn signal cam. Old one looked just like new one but replaced it anyway. Turn signal still don't cancel so it looks like I tear it apart and replace the whole switch now.

skylark · Feb 26, 2017

If your truck is a 88-94 then you need to replace the springs in the switch.
https://m.summitracing.com/parts/rn...CXUXKsyS7rkvJmW_oz094cEatHE1kQWcZYaAjRF8P8HAQ

rlast1 · Feb 27, 2017

yep one broken spring. Decided to check the slight play in upper column and found one of the bearings had lost some of its balls and the plastic bearing cage is destroyed.

jdjonesdr · Mar 25, 2024

FWIW... I replaced both the cam and the base that's mounted underneath, and it still wouldn't cancel my left signal. No problem with the right cancel. I tried moving the base around but no luck.

If I put just the smallest amount of pressure on the turn stalk it would work, but that was the only way it worked.

I finally ended up putting a very thin layer(less than 1/16") of JB Weld on top of the cam hump and that did the trick.

Non canceling turn signal

rlast1

Newbie

skylark

I'm Awesome

rlast1

Newbie

jdjonesdr

Supporting Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page