my victory red 1997 chevy k1500

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
Two more pics, I can't get more than two pics to upload at a time

You must be registered for see images attach


You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
It's finished and ready for me to install... I ended up having a trusted coworker put it all back together because he wasn't nearly as busy as me...he is a good builder.it only ended up costing me $346.94 that's with a new converter new monster sun/reaction shell.new band,new clutches everything new

You must be registered for see images attach


You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
I finished reinstalling the trans last weekend.iv been driving it to work, the tranny works good it was basically a stock rebuild. A corvette servo was also added.i also installed a new walker y pipe with new cat converters and a new y pipe, along with four new 02 sensors

You must be registered for see images attach


You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
This past fall I rebuilt the doors for second time since I have owned the the truck .i put in new hinge pins and bushings.new inner and outer door handles. New door detent roller things.And some ebay maroon/red door panels that are in really good shape my old door panels were trashed.

You must be registered for see images attach


You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
I went to the junk yard and got a new drivers side seat belt for ten bucks because my original one was trashed.

You must be registered for see images attach


You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
Also last satorday I installed a new Delphi ac compressor an orifice tube and an ac delco drier and a four seasons ac house with the mufflers in it. It blows between 38-40 degrees now I didn't take very good pics because at the time I was so focused finishing the job

You must be registered for see images attach
 

red97k1500

I'm Awesome
Joined
Dec 4, 2009
Messages
107
Reaction score
38
Location
Texas
Changing out the drier was the hardest part. The tube that goes from the drier to the evaporator was seized pretty bad but in the end it all worked out. Here is apic charginging it back up.

You must be registered for see images attach
 

BerHntr

I'm Awesome
Joined
Oct 7, 2016
Messages
351
Reaction score
266
Location
MS
You mind taking a couple shots of the dash pad? I've been debating on one as my dash is cracked and have been unsuccessful in finding a decent replacement.
 
Top