Project k1500 93 350

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
So i had some free time today decided to finally finish the floor.. just actually remove the surface rust and paint it with rust black paint.. also had that throttle body gasket kit so i decide to remove it clean it and put new gasket all around..

You must be registered for see images attach


You must be registered for see images attach
 

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
Removing the old rad support and ill put the one the dude gave me with.. its in perfect shape and only needed to remove 2 more bolt to get it out... also took away that bumper with the plastic strip on it and also gonna put the other one he gave me with the truck.. also slowly starting to remove those 8+- bolt for the bed everytime i come smoke in the garage i remove one :893karatesmiley-thu should be done by tomorrow haha...for now i broke 2/3 idc since this bed will go to scrap i almost prefer that.. way faster haha.. waiting for some parts to come so i got pretty much nothing to do right now.. maybe prepare the cab for a paint but yeah... :buffer:

You must be registered for see images attach


You must be registered for see images attach


Ohhhhhh and yes you're correct this is a fram oil filter.. :badidea: buuuuttttt lemme explain myself before you judge me! I was only planning to run it for a drive or two and do another oil change...
 
Last edited:

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
Also was gonna go for the xj shaft convertion but found out with the room i had with headers and stock shaft i should maybe think twice before doing it saw some people having trouble with the heat against the shaft.. someone mention heat shield paper but nobody say they tried and it work..




Ohh and forgot about that thing i got today from picknpull and yeah its not the same color but i was wondering if i could change it to black in any way.. plz dont say sharpie.. but yeah if not whatever ill use it until i find a blue one.. paid it 20$ cant hurt.. and also had a handfull of bolts, an oil cap those 2 long screws that hold the air intake cover.. and a cigaret lighter loll... for 20 i couldnt say no

You must be registered for see images attach
 
Last edited:

deejaaa

Became Less Of A Human 5-13-18
Joined
Jan 28, 2015
Messages
749
Reaction score
355
Location
Somewhere on the Texas coast
i don't think the lid can be color changed. people use SEM, a plastic dye, with mixed results.
i'm in for the build cause it's a 93.
BTW, been to Edmonton. in-laws live in SK.
 

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
The wife is doing the color change now.. and im in the garage removing the box from the truck... idk what quality bolt the guy put in with his lift kit but got 7 out yet and only 1 isnt broken.. and now got to cut the last one.. will paint that rear frame today test the gas pump change the gas tank and finish cutting rust from cab corner to make it ready for new one! I WILL EAT THAT :********:
 

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
Box removed gas tank removed.. found 2 hole in the gas tank.. and since im not planning on removing the new box any time soon or make a hole for the fuel pump i decided to just buy a new pump.. will also do the brake hose.. they are really bad.

You must be registered for see images attach
 

Keven

OBS Enthusiast
Joined
Nov 2, 2016
Messages
89
Reaction score
8
Location
Edmonton
Found this alternator for 40$ the dude use it 2 weeks and now he part out the truck.. come with the receipt 180$ and with life time warranty.. so yeah lately i didnt had time for the project just had enough to order rocker,cab corner, gas pump, gas tank should get all this next week.. so i got the weekend to find a mig and ive really been wondering if i should go with a 110 or 220... ill only probably use it on body panel i got my es275i for other work.. i saw one on kijiji the guy would take 240.. i dont wanna spend much but at the same time if its **** i dont wanna waste my money either.. anybody already tried one? And is it me or this lincoln doesnt look like a lincoln? Ive been looking on flyer and website but didnt see that one..

You must be registered for see images attach


You must be registered for see images attach
 
Top