97 Z71 push button 4x4 problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Anthony85

Newbie
Joined
Dec 5, 2016
Messages
2
Reaction score
0
Location
Mulberry, Arkansas
I bought the truck from a buddy of mine. He had the transmission rebuilt, transfer case rebuilt, new Tccm, new and updated front end actuator, new push button switch, and new actuator motor on transfer case. With the ignition on, there is no orange indicator light on stating the truck is in 2hi. If you try to put it in 4hi or 4lo noting happens unless you hold down either one for about 5 seconds and it only does that if the transmission is in neutral. When you do that, both 4hi and 4 lo lights come on no matter which one you select. You can here the actuator on the tcase atleast sounding like it's trying to engage but you can spin the front driveshaft with your hand. Just looking for some insight as to what kind of problem I'm dealing with. Any information is appreciated!
 
Top