I bought injectors (3yr warranty) off of ebay for $118.49
http://www.ebay.com/itm/281152255299?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
I bought NGK spark plugs, didn't like them and I might have fouled them doing the seafoam thing so I bought a set of AC delco rapid fires, putting them in tonight if it doesn't rain.
don't forget the replace the gaskets. I did the intake, throttle body, and EGR gaskets, and make sure the machined surfaces are perfectly clean, a vacuum leak can cause all sorts of other issues.
be very gently on the injector clips on the fuel rail, the rail is plastic and they'll snap right off (i broke 4 out of 8)
I did the cap, rotor, and coil since i was in there but left the wires since they looked pretty new and OEM AC Delco's.
you'll also probably break some vacuum lines so keep good track of where they go.
Also good luck getting that exhaust pipe off the intake manifold, I couldn't and gave up and did the repair with it still connected which was horrible, get that thing off before you do anything else, I tried penetrating oils, a torch, and breaker bars with no luck.
http://www.ebay.com/itm/281152255299?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
I bought NGK spark plugs, didn't like them and I might have fouled them doing the seafoam thing so I bought a set of AC delco rapid fires, putting them in tonight if it doesn't rain.
don't forget the replace the gaskets. I did the intake, throttle body, and EGR gaskets, and make sure the machined surfaces are perfectly clean, a vacuum leak can cause all sorts of other issues.
be very gently on the injector clips on the fuel rail, the rail is plastic and they'll snap right off (i broke 4 out of 8)
I did the cap, rotor, and coil since i was in there but left the wires since they looked pretty new and OEM AC Delco's.
you'll also probably break some vacuum lines so keep good track of where they go.
Also good luck getting that exhaust pipe off the intake manifold, I couldn't and gave up and did the repair with it still connected which was horrible, get that thing off before you do anything else, I tried penetrating oils, a torch, and breaker bars with no luck.