Need tbi heads

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

STROKED

Newbie
Joined
Jul 23, 2016
Messages
7
Reaction score
0
Location
California
Hello all, im new to this site.

I have a 91 rcsb 350 tbi, removed both heads and had them checked. Both heads are cracked these are the 193 heads 65.3cc chamber.

Anyone know if there are cheap replacement heads i can get? This is my daily driver. I thought about Vortec 062's but that would mean i need to by intake, rockers, push rod and EGR pipe/ exhaust manifold. This route too expensive for me.

Is there any full assembled cast iron heads out there that i can just bolt on?
 

SAATR

/\___/\___/\___/\___/\
Supporting Member
Joined
Dec 16, 2010
Messages
2,649
Reaction score
946
Location
Loo E Z an uh
Call around to a few local machine shops that specialize in automotive machine work. They may have some sitting on the shelf rebuilt and ready to go.

Sent from my XT1585 using Tapatalk
 

SAATR

/\___/\___/\___/\___/\
Supporting Member
Joined
Dec 16, 2010
Messages
2,649
Reaction score
946
Location
Loo E Z an uh

STROKED

Newbie
Joined
Jul 23, 2016
Messages
7
Reaction score
0
Location
California
superdave, i was looking at that intake few days ago, like SAATR said the 2 middle intake bolts on them are not set at correct angle.

SAATR, your right cant spend on a intake trying to go cheap as possible to get it back on the road. Also need to pass CA emission (smog test), thats why need the EGR functioning.
 

STROKED

Newbie
Joined
Jul 23, 2016
Messages
7
Reaction score
0
Location
California
Big D those heads would be great if everything is ok on them. Only problem i am in San Jose, CA. Going to pick them up and finding out heads are cracked would be risk. Plus the cost of gas to get there.
 
Top