Post your lifted 2wd's!

95C1500 · May 17, 2016

Different wheel options. If you have the spindle lift, it pushes the front wheels out and you have to run spacers on the back for the track width to be the same. If you get a 6 lug axle from a 4x4 truck, it'll widen the track width of the rear

Victor · May 28, 2016

Year: 1995
Make: Chevrolet
Model: Silverado C1500
Gear size: Stock 3.73's With G80
Tires: 32x11.5r15 KO2's
Wheel Size: Craggar D 15's
Lift kit size and Brand: 4" Rough Country spindle lift
Coil Spacers: 2 Inch Coil Spacer
Wheel Spacers: 1.5" rear
Lift Blocks: 2" block(Not installed in pictures)
Add-A-Leafs: None
Body Lift: None
Aftermarket Bumpers: None

Question, What aftermarket UCA do I need to fix my camber issue? Do the 4x4 rough country ones for a 2wd?

You must be registered for see images attach

Victor · May 28, 2016

dcp1992 said:
I love them. I'd say they are the same as Canuck's and Doetsch's. Haven't had any problems and they were able to adjust with my 2" spacers.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Where did your I get these? Do the correct the camber issue do to coil spacers?

dcp1992 · May 28, 2016

Victor said:
Where did your I get these? Do the correct the camber issue do to coil spacers?

I got these through Crown Suspension's eBay and yes, they do correct the camber issues when doing lifted coils/spacers.

The sad news though is that they don't seem to sell them anymore... just like the other places. You might be able to contact them though and see if there is anyway they could get another set.

Victor · May 28, 2016

dcp1992 said:
I got these through Crown Suspension's eBay and yes, they do correct the camber issues when doing lifted coils/spacers.

The sad news though is that they don't seem to sell them anymore... just like the other places. You might be able to contact them though and see if there is anyway they could get another set.

Thank you Sir!! When I was first starting to ponder about lifting my truck. I noticed a lot of Crown lift kits but didn't know to much about them so went with RC. Now I can't seem to find them anywhere. I'll give Crown a call and see what they say.

GraysonR · Jun 9, 2016

The bottom pic shows my 1.75" wheel spacers. They line up perfectly, I would recommend that size to every 2wd obs owner.

You must be registered for see images attach

95C1500 · Jun 9, 2016

i had 2" spacers on mine and thought I needed bigger ones to make them even haha. Truck looks good

My lifted 2wd

You must be registered for see images

Torchred · Jun 9, 2016

Missing the old girl right now, shes down for engine work. But heres an older pic that I havent posted.
95 C1500 4" RC Lift up front, stock in the back, 285/70/17

You must be registered for see images attach

P-rez · Jul 2, 2016

What up fellas haven't been on here in a bit...but here is whats going on with the Burban now.

Freshly Rebuilt engine just put in...other engine died on me... had a rod knocking..

Adding Fabtech UCA and Coils...to give it a total 6" lift..

95C1500 · Jul 2, 2016

Current pics?

Post your lifted 2wd's!

95C1500

┌П┐(◣_◢)┌П┐

Victor

Newbie

Victor

Newbie

dcp1992

Instagram - @dcp1992

Victor

Newbie

GraysonR

Newbie

95C1500

┌П┐(◣_◢)┌П┐

Torchred

Carolina Can

P-rez

Newbie

95C1500

┌П┐(◣_◢)┌П┐

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page