Project Ted, a 1993 RCSB 496 Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Justin S

Truck Hoarder
Joined
Feb 14, 2016
Messages
3,108
Reaction score
1,978
Location
Finger Lakes NY
I've already got a chrome cover with new hardware, didn't think it would be wise to put it on before paint!
 

Justin S

Truck Hoarder
Joined
Feb 14, 2016
Messages
3,108
Reaction score
1,978
Location
Finger Lakes NY
Brought my control arms to work and installed the poly bushings and ball joints
You must be registered for see images attach
 

Justin S

Truck Hoarder
Joined
Feb 14, 2016
Messages
3,108
Reaction score
1,978
Location
Finger Lakes NY
In the process of reinstalling the arms, and got the poly bushings in the leaf springs
You must be registered for see images attach
You must be registered for see images attach
 

Justin S

Truck Hoarder
Joined
Feb 14, 2016
Messages
3,108
Reaction score
1,978
Location
Finger Lakes NY
Got the steering all together, New tie rods, idler, pitman, and painted everything. Forgot to sandblast my quick ratio gearbox so i buzzed it off the best I could at work.
You must be registered for see images attach
You must be registered for see images attach
 

Justin S

Truck Hoarder
Joined
Feb 14, 2016
Messages
3,108
Reaction score
1,978
Location
Finger Lakes NY
Also bolted up the gearbox, didn't feel like doing anything else, had to mow the lawn! Looks like my carrier bearings should be in tomorrow, I plan on having the rear end bolted in place at the end of this weekend.
 
Top