92 k1500 4x4 not working

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

stenny

Newbie
Joined
Nov 17, 2015
Messages
22
Reaction score
1
What is a sas? A 4bt is same block minus 2 cylinders. You need to do a body lift of 2 inch. And you may need to change torsion bars to a k2500 or 3500 bars. Ypu need custom engine mounts. Adaptors etc depending on ehat tranny you use
 

MIKE BROGDON

OBS Enthusiast
Joined
May 8, 2016
Messages
73
Reaction score
23
Location
FLORIDA
Im in the same boat with my 94. Changed the actuator and still no 4wd. As stated above the switch is closest to to the front, I used a 1 1/8 wrench to remove mine. Orielly ordered one for me though for Like $25. I plan on doing the cable swap in the future though. Should be here tommorow
 

Hohns96z71

Newbie
Joined
Oct 27, 2016
Messages
4
Reaction score
0
Location
Dayton texas
Sas is a solid axle swap. You can get the kit from offrod design. But you will need the axles from a dodge or ford.
 

stenny

Newbie
Joined
Nov 17, 2015
Messages
22
Reaction score
1
I know i probably should have quoted you but i was just stating its not needed there would be no gain
 
Top