Blend door assembly

mackguy · Apr 15, 2016

Yes, reading the description and not really having a full write up on the procedure makes me think strongly about
A) just dealing with it, as the temp and fan still work fine, just the diverter that's not working
B) saving up to let the dealer or another shop take care of it someday.

Brianb5 · Apr 15, 2016

http://www.thetruckstop.us/forum/th...t-door-hvac-flow-distribution-flap-box.31159/

This is the write up I used pics are not coming up. Not sure if it's much help now. And I used about a 3 minute youtube video for rotating the dash can't seem to find it. Will keep looking. If you got the cash to allow a shop to do it it's probably well worth it. I would guess somewhere around $800-1200 and way more from the dealer. I'm not a mechanic just an estimate. It is not my main truck so I took my time with it over about a week to get it all done. I was painting interior trim as well. And only working a couple hours each night. Mine had to be done defroster was on all the time fogging up the window constantly. Hope I helped a little bit

Sent from my SM-N910V using Tapatalk

mackguy · Apr 18, 2016

Thanks, wish the pictures worked there, but the write up is reasonably good and it doesn't *sound* too terrible. We'll see when this moves to the top of my list, as it's not terribly annoying yet..

jollyjerry · Apr 28, 2016

Can you take a photo of the levers? The spring in mine fell out and I had to reattach them. See http://www.gmt400.com/threads/no-air-on-driver-vent-only.30762/

I'm having problems with mine again. Thought the actuator was broken, but took it apart and it tested fine. Going to test the knob when I get home to make sure that's not broken.

jollyjerry · Apr 28, 2016

Would you mind taking a photo of your actuator too? While testing it, I moved the position, so not I'm not sure where it should index. Online photos suggest the center position, but I think I remember it being on the left.

You must be registered for see images attach

mackguy · May 2, 2016

Jerry, was your picture request to me or Brian?

jollyjerry · May 2, 2016

mackguy said:
Jerry, was your picture request to me or Brian?

Thanks for replying, but I picked up a replacement and figured out the notch should be in the center. That wasn't enough to fix it though because the door itself isn't sealing well and air's blowing past it.

Blend door assembly

mackguy

I'm Awesome

Brianb5

Newbie

mackguy

I'm Awesome

jollyjerry

I'm Awesome

jollyjerry

I'm Awesome

mackguy

I'm Awesome

jollyjerry

I'm Awesome

Similar threads

Latest posts

Members online

Forum statistics

Share this page