1999gmc
I'm Awesome
- Joined
- Apr 11, 2013
- Messages
- 115
- Reaction score
- 44
I use Napa premium. They are pretty good suspension parts. Are you tightening the control arm bolts after you lower it down, or when it's still in the air?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So where can i get the uhmw bushings? Instead of the red or black polys?
I lock them down before setting it on the ground but also running 15x14s on a 33I use Napa premium. They are pretty good suspension parts. Are you tightening the control arm bolts after you lower it down, or when it's still in the air?
I would wait until it's on the ground before you torque them down. Get them threaded until you run out of thread them go the rest of the way while it's on the ground. You're torquing (I'm assuming) them down in a full-droop position, not natural.I lock them down before setting it on the ground but also running 15x14s on a 33
I lock them down before setting it on the ground but also running 15x14s on a 33