camaroman101
I'm Awesome
wow thats a fantastic find
K2500 as a Daily
- Thread starter 11MPG
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Also bought this. Don't hold your breath. To busy lately to make it up to the shop and rip the engine apart for a while.
Nothing crazy. 220/224 duration LSA 111 Hydrolic Roller. Will still have good mid range grunt.
http://m.summitracing.com/parts/cca-k08-413-8
Nothing crazy. 220/224 duration LSA 111 Hydrolic Roller. Will still have good mid range grunt.
You must be registered for see images attach
http://m.summitracing.com/parts/cca-k08-413-8
Jorge6.5
I'm Awesome
Sweet! Is that a roller lifter retro fit kit?
99'Subourbon
Longroof NOOA Member
Truck looks great, amazingly clean.
BowtieBrody
Jesus Murphy!
I would do. Unspeakable things. To get a RCLB K2500 that's this clean.
And for $6500!? That's easily and $8500 truck in my area!
And for $6500!? That's easily and $8500 truck in my area!
TrailBlazerZ71
I'm Awesome
You need to come to Vegas. The average GMT400 price here is around ,$4000
Sent from my Vortec-powered Droid Turbo using Tapatalk
So did a real sound system with a P900.5 amp, JL Audio Sub, 2 front high end 6.5 JBL GTO series speakes with tweeters, and rear 4x6 JBL GTOs.
Next was the coil, plugs, wires and swapping the injectors from CSFI to MPFI.
Mag-Hytec Cover.
Did a clear chip guard liner under the trim line.
And finally Thrush Turbo muffler true duals with 4 inch tips.
The tips are level in relation to the ground and not the fender which is why they appear crooked in the picture.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Next was the coil, plugs, wires and swapping the injectors from CSFI to MPFI.
You must be registered for see images attach
You must be registered for see images attach
Mag-Hytec Cover.
You must be registered for see images attach
Did a clear chip guard liner under the trim line.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
And finally Thrush Turbo muffler true duals with 4 inch tips.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
The tips are level in relation to the ground and not the fender which is why they appear crooked in the picture.
Similar threads
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.