1997k1500Calvin
I'm Awesome
Yea I've heard a lot about the billsteins.. That's probably what I'll do
Installing GMT900 rear Cab mounts in a GMT400
- Thread starter Aloicious
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1997k1500Calvin
I'm Awesome
Which billsteins would you recommend for the best ride.. I literally haul a small lawn mower trailer at most do I don't need hd shocks.. And would air shocks be worth doing?
Chevyguy78
I'm Awesome
I suggest the 5100 series Bilstien. I've had them on my truck for years and it rides better then my wife's car. Its so smooth. I will never run another type of shock on my truck.
Looking at the part numbers on Amazon, am I missing something or do these come as a pair?
http://www.amazon.com/General-Motors-CUSHION-25994881/dp/B008Y9EUH8
if I buy 2 of these that will run 112 just for the top mounts.
http://www.amazon.com/General-Motor...=UTF8&qid=1438956905&sr=1-1&keywords=25791032
92 more just for the bottom mounts.
http://www.amazon.com/Genuine-GM-Re...=UTF8&qid=1438956933&sr=1-1&keywords=15854745
~14 more for the bottom mounts.
Is $218 what it will cost to do this or am I missing something? Seen a lot of post for around half of that.
http://www.amazon.com/General-Motors-CUSHION-25994881/dp/B008Y9EUH8
if I buy 2 of these that will run 112 just for the top mounts.
http://www.amazon.com/General-Motor...=UTF8&qid=1438956905&sr=1-1&keywords=25791032
92 more just for the bottom mounts.
http://www.amazon.com/Genuine-GM-Re...=UTF8&qid=1438956933&sr=1-1&keywords=15854745
~14 more for the bottom mounts.
Is $218 what it will cost to do this or am I missing something? Seen a lot of post for around half of that.
DuncMac1543
Newbie
Does anyone have dimensions from centre of the rad mounts to the centre of cab support? my cab to frame mounts have rotted out and I would like to repair them properly and have the cab sit square on the frame.
Energy Suspension lists the same part numbers for the rear mounts on their regular cab and extended cab mount sets.
http://imagesrv.catalograck.com/imgVD/ENE/17037.pdf
http://imagesrv.catalograck.com/imgVD/ENE/17037.pdf
ddaxe
If it don't go... chrome it..!!
Seems to be a very common problem in the rust belt.. I used shock mount plates from railway passenger coaches to fix mine.. they fit perfectly... I just need to weld them in.. and good to go...
You must be registered for see images attach
Sent from my iPhone using Tapatalk
MIHELA
1-5-6-3-4-2-7-8
Those look nice, where would one acquire those?
Similar threads
Staff online
-
df2x44L60E Destroyer
Members online
- tybcr783
- DAWJ
- Aqua-pig
- Turboturro
- offroadtahoe
- 1998_K1500_Sub
- RoyBob
- LTrUS
- Tuffsnuffy
- Remodelmaster
- Lowsport14
- Spareparts
- caw_86
- umwtnt
- Justin97z
- Danimal08
- Blue91
- caminonut
- vince72
- BonestockK1500
- AK49BWL
- df2x4
- Pinger
- Drunkcanuk
- Dropped88
- BigReb95
- Harkin
- tim46800
- Scooterwrench
- Check251
- T1najero
- seh12760
- gearjammer98
- 618 Syndicate
- locotechnelson
- Moparmat2000
- GMCGerbil247
- JAMES98WS6
- dads98
- Bob141
- Das Hatt