'98 Silverado Z71 "Town Pickup"

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
Did a quick paint job on the emblem to see if I liked it. I was thinking about doing the red and black sport emblem, but this done right and some clear should fit the bill.

You must be registered for see images attach
 

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
exhaust is ordered!

lawson stainless y-merge, dynomax 17233 ultraflow, and a magnaflow 15044 3.5" stainless tailpipe. the tailpipe is overkill, but for $59 shipped to my door for a stainless tailpipe, i'll give up a little velocity.

this will take care of the back half of the exhaust all in stainless and give me some time to decide what to do on the front side. this 17233 is the 20" case, so it should be a nice deep mellow tone until you stand on it. i was going to use the 17221, but i want this pickup to be quieter than the last one inside.
 

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
Scratch the 3.5" tailpipe, Magnaflow discontinued all universals. I did find a 3" 15032 to replace it.
 

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
gratuitous parts picture! still waiting on the tailpipe, trying to decide if i should just knock the front half out while i'm at it....might just order the jeg's off-road pipe and call it a day. exhaust shops around here really drag their feet when you want "custom" work. someday i'm going to find an old hydraulic pipe bender with the dies and i won't have to worry about it anymore.

You must be registered for see images attach
 

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
well 0 for 2 on tailpipes...apparently it is common now to advertise parts you don't actually have in stock, yet claim it to be "in stock".

so i'll probably just order the ap x6007 3" aluminized pipe. i will not commit to this yet, as it will probably no longer be available also!
 

OutlawDrifter

Long Roof K2500 Driver
Joined
Jan 22, 2016
Messages
1,142
Reaction score
2,216
Location
KS
the ap x6007 is around $50 shipped or i could use the dynomax 45683, but they are backordered like the one you linked, and the 54704.

if i have to spend around $80 i'll just make my own out of mandrel bends, then it will be exactly what i want.

you need to get that y-pipe on and let me know how it fits ;-)
 
Top