Floor pan, inner and outer rocker panel and cab corner replacement

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
811
Reaction score
167
A few more pics from today, everything up top is done, just need to get underneath and finish welding up some spots. Once that's done I can start seam sealing and priming everything.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

Jrgunn5150

Enjoying tomorrow's success today
Joined
Aug 23, 2014
Messages
5,847
Reaction score
1,283
Location
Ionia Michigan
When replacing panels like this are you just tac welding and then using a seam sealer on the spaces between tacs? Sorry, I don't really do body work.


I tack, tack, tack, jumping around and working until all the spaces are filled in, then I grind it smooth with a 36 grit on a rolloc or a flap wheel. If it's a flange or something, I seam seal it, but like a cab corner that's exposed, you would weld fully.
 

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
811
Reaction score
167
Update, I got most of the tack welding done up top and spent a lot of time adjusting the top door hinge once I found out it had been hit and pushed in. Took the bed off today and will start working on the flip kit and the c notch soon.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

jmig

Can't leave it stock
Joined
Jun 15, 2010
Messages
811
Reaction score
167
Completed the static drop and started back on finishing up the cab corner, rocker and floor pan patch panels.
Here's a few pics of the drop finished and the welding done this afternoon.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 
Top