LOW BUDGET LS swap AC relocation brackets, VERY NICE factory looking install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

K30burb

Newbie
Joined
Sep 4, 2014
Messages
43
Reaction score
6
I have utilized and redesigned an AC relocation setup that works very well, and is VERY factory looking. it is a clean and tidy install/relocation setup. I will sell the brackets with bolts for $315. including shipping in the lower 48 states. you will need to supply the compressor, longer serpentine belt, and oem factory hoses to finish the kit. I will include the part numbers for the compressor, the longer serpentine belt, the factory ac hoses that work with the kit. this relocates a gm compressor to the passenger side front top of the engine. it clears the hood, and looks very factory. this kit is designed specifically for gmt 400 trucks, but could be fit to other non gm vehicles with ls swaps. most of the ac relocation kits on the market are $1000. and up. I am trying to keep mine very economical for guys to use and install.

You must be registered for see images attach


You must be registered for see images attach
 

K30burb

Newbie
Joined
Sep 4, 2014
Messages
43
Reaction score
6
they are factory 90-95 gmt400 ac brackets, remachined and new braces to utilize in our trucks with ls swaps. looks very correct.
 

95SUBURBANLM7

OBS Enthusiast
Joined
Jun 8, 2015
Messages
80
Reaction score
8
Can you post some better pics. I'm just finishing up my LS swap and am looking for a bracket for my stock compressor.

Nick
 

GordonCustoms

I'm Awesome
Joined
Jan 22, 2012
Messages
145
Reaction score
130
Location
Princeton, IL.
Lextech already makes A/C relocation braket that mounts the GMT400 A/C back in its stock location so you don't have to disconnect your A/C lines at all to do a LS swap
 

Attachments

  • Lextech ls braket.jpg
    Lextech ls braket.jpg
    20.7 KB · Views: 228
Last edited:

K30burb

Newbie
Joined
Sep 4, 2014
Messages
43
Reaction score
6
Lextech already makes A/C relocation braket that mounts the GMT400 A/C back in its stock location so you don't have to disconnect your A/C lines at all to do a LS swap

nice looking setup. it looks like his mounts the ac compressor on the drivers side top? and then relocates the alternator to the passenger side top? alot of moving things around and does not look that factory. but to each their own. my kit leaves the original truck 5.3 accessories intact and in stock locations except ac, which is mounted on passenger side top instead of passenger side bottom. and it is gm brackets that have been remachined so it looks correct because it is all gm parts. no disrespect to lextech meant.
 

youngblood78

Newbie
Joined
Feb 7, 2016
Messages
7
Reaction score
0
Location
Virginia
Have you gotten any pictures of the brackes you re do the ac has me on the fence of doing the 6.0 swap
 
Top