Carnage and Stuck Pics
- Thread starter 1996 yukon
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
1BigCarrot
I'm Awesome
Brave man for posting that pic 
No way would I ever admit to that 
Like Tyler said, lucky it stopped where it did, you could've been climbing out a window.
Hey red, my 2wd van gets stuck on grass, how the hell do you manage that with your truck
hahaha
No way would I ever admit to that Like Tyler said, lucky it stopped where it did, you could've been climbing out a window.Hey red, my 2wd van gets stuck on grass, how the hell do you manage that with your truck
hahaha
No need for suspension of Fords, just bolt the axles directly to the frame and they'll flex like a rock crawler
The original g80 grenaded on me at 180k, the good news was it was turning the corner at the end of my street 4 houses away. Thank God, as I was pulling my 16’ tandem axle. With out the couple grand to fix it right, I started the junk yard search for a g80 with 373’s. Found one and it lasted almost 20k then this happened...
No trailer this time but it had started making some bad noises, and while decelerating into a left turn lane on a busy 6 lane highway I felt it grinding to a halt. Not wanting to be stuck in this horribly busy and dangerous intersection, I used the front axle to break it loose. Only broke the rear u joint. Was trying to get her around the corner and hopefully into the shopping center parking lot but that’s as far as I made it before the axle slipped all the way out. Local cops thanked me for getting it out of traffic and the AAA guy had a blast getting it on the flatbed.
You must be registered for see images attach
No trailer this time but it had started making some bad noises, and while decelerating into a left turn lane on a busy 6 lane highway I felt it grinding to a halt. Not wanting to be stuck in this horribly busy and dangerous intersection, I used the front axle to break it loose. Only broke the rear u joint. Was trying to get her around the corner and hopefully into the shopping center parking lot but that’s as far as I made it before the axle slipped all the way out. Local cops thanked me for getting it out of traffic and the AAA guy had a blast getting it on the flatbed.
GarrettGmc
I'm Awesome
Damn, good thing u were able to get out of traffic.
Culterworks
Newbie
Ramp slipped off while unloading ATV, ruined my nice paint.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Don’t like the carnage but love the utility of that diamond back cover. I can’t bring myself to spending that much for a bed cover. I’d love to find a used one, but the chances of that are slim to none for a gmt400.
bugdewde
I'm Awesome
My '99 6.5 Heavy Half (sold). Fender on my utility trailer came off & busted a car's tire. I did a U-turn to go back & help the car change his tire & get my fender.
Ground was soaked and the heavy pig slid right down the bank, unable to get back up to the pavement on the shoulder.... even in 4wd. Buried up enough the trailer bottomed out (only had a rider mower on it).
Had to unhook the trailer and power out, spinning 3 tires and occasionally 4. Mud was everywhere.
Ground was soaked and the heavy pig slid right down the bank, unable to get back up to the pavement on the shoulder.... even in 4wd. Buried up enough the trailer bottomed out (only had a rider mower on it).
Had to unhook the trailer and power out, spinning 3 tires and occasionally 4. Mud was everywhere.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
