90 GMC Sierra SL Work in progress

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
Did you replace the bed or have better than average luck with the 5 pound sledge? In the last few pix I don't see that horrendous dent in the right rear... or is it just the angle?
Angle. I haven’t looked for a bed yet.


Sent from my iPhone using Tapatalk
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
You must be registered for see images attach

Drove it into work. MAN does it need shocks. Hoping the power steering leak doesn’t fail inspection.


Sent from my iPhone using Tapatalk
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
During lunch yesterday I cleaned the dash more.
You must be registered for see images attach
You must be registered for see images attach

Then I was cruising Craigslist and found the exact seats I wanted. For $50. Should have got shocks instead but it was too good of a deal to pass up.
You must be registered for see images



Sent from my iPhone using Tapatalk
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
Started the seats. Drivers is mounted. Need to modify passenger more and run wires for driver power.
You must be registered for see images
You must be registered for see images



Sent from my iPhone using Tapatalk
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
So my fuel injectors weren’t spraying properly. So I decided to change the fuel pump.
You must be registered for see images


And I still haven’t had the plug wires changed so I got blue 8mm wires.
You must be registered for see images


I believe I need to change the IAC valve tho. I have a hard sputter at idle. And no power at low revs


Sent from my iPhone using Tapatalk
 

NightRunner

Resident Junkman
Joined
Mar 23, 2018
Messages
514
Reaction score
274
Location
DFW, TX
Damn, good thing the bed was messed up already. You put a nice hole in it lol

Least changing the fuel pump and lines will be easier in the future
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
Well I plan on finding a good bed later down the road. There’s no real way to fix the rip in the right rear. And my tool box covers it completely anyway


Sent from my iPhone using Tapatalk
 

crashnitup

I'm Awesome
Joined
Jan 26, 2018
Messages
158
Reaction score
279
Location
Madisonville TX
Cleaned the gunk under the hood
You must be registered for see images
You must be registered for see images

Then painted the grille inserts
You must be registered for see images attach
You must be registered for see images attach



Sent from my iPhone using Tapatalk
 
Top