big_mike
I'm Awesome
I have heard for the money it's not worth it. There are aftermarket units that are far better options to grow with and can be done for about the same price.
Cam and other advice, vortec 350
- Thread starter Chris253
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have heard for the money it's not worth it. There are aftermarket units that are far better options to grow with and can be done for about the same price.
L31MaxExpress
I'm Awesome
I like mine...For ease of installation, the cost of the complete conversion (I did not have $600 in my whole setup after selling all the factory marine bits that were not used on Ebay) and the power gains it gave it was a no brainer. It also looks practically stock so I have yet to find anyone even notice it. Then again my L31 completely hidden is under the cowl.
It pulls strong to 6,000 rpm with the GM SPO 357 HP 350 crate engine cam. Engine has 1.7 rockers and ported 906s with 2.02/1.60 valves. Tri-Y headers, and factory dual 3" exhaust piping to the muffler.
Last edited:
Similar threads
Members online
- AK49BWL
- Caman96
- Scooterwrench
- 99xcss4
- Dantheman1540
- Arthurius
- S_det
- hutcholdschool
- SNCTMPL
- 1998_K1500_Sub
- honkon
- Ivanmartinez1338
- skiderjr
- PlayingWithTBI
- Cjruff41
- JPVortex
- Hipster
- Mg guy
- 98BlackSierra
- L31MaxExpress
- Manuelmedrano1993
- kevin87turbot
- Keeper
- Anchor
- 1996bluegreychevy
- e21mdion
- Dravec
- rockR67
- Sean Buick 76
- Gobo
- 1Moneypit
- Brian71583
- chadda989
- termite
- 06June1944
- v8wxd
- JS45
- Mcsmiles
- cody_mcca
- Gordy_
- joris333
- 618 Syndicate
- Komet
- Salty K1500
- Patina56
- truckmonkey
- anderson5434
- The Mad Hatter
- torkedwrencher
- johnckhall