Recent content by wb292

  1. wb292

    What rim offset to make it look «normal»?

    I used Stahl 2 inch spacers on both my 95 K2500 burb and my 95 K2500 truck. I used the steel versions and problem solved. Looks great and work great.
  2. wb292

    7.4 swap c1500 tight on the passenger side

    I g he ad to use headers specifically for a454SS for mine to clear. Made by JBS
  3. wb292

    Front Lower Control Arms

    I haven’t installed these on a newer truck. I’ve read as K20 stated there will need to be some grinding for clearance. Or use a set of Knuckles from a older trunk in pick a part.
  4. wb292

    TBI 454 Misfire

    I’m battling the same issue with my 95 Suburban 454. You might try inspecting the white wire coming from the knock sensor. Mine had rubbed through the insulation with the blue wire next to it. This sent full voltage to the ECM and retarded the timing causing a misfire . Sometimes violently. I...
  5. wb292

    Tire PSI for hauling firewood

    IMHO the door sticker only applies to the original uniroyals that came on the truck. Tire tech has came along way in 30 years. Usually cheaper made. I run the max printied on the tires sidewall. Different manufacturers have different pressures on the sidewall. So recommendations for this or that...
  6. wb292

    JBA or any Long Tube headers

    My 91 is a K1500 with a 350. My 454SS is a 1990 model. It had a single exhaust.
  7. wb292

    '95 350tbi stumbling

    Sounds like the Idle air control valve on the passenger side of the throttle body.
  8. wb292

    Suburban Roof Rack Capacity

    You are awesome!!! Thank you!!!
  9. wb292

    Suburban Roof Rack Capacity

    Does anyone know the weight limitations for a 95 Suburban Roof Rack? I did a search but couldn’t find any info. Thanks
  10. wb292

    Dug into my front suspension today. Now I have a steering knuckle question.

    Sorry about that. I got it off of ebay a while ago. So I didn’t have a link for one.
  11. wb292

    Dug into my front suspension today. Now I have a steering knuckle question.

    If you take the LCAs off the bars you won’t need to fight the keys. Other than backing the tension off of them.
  12. wb292

    Dug into my front suspension today. Now I have a steering knuckle question.

    Installing them was easy. I cleaned up the bars and used never seize on the hex. Slid right into the new arms. Snug fit but I could move them by hand.
  13. wb292

    Dug into my front suspension today. Now I have a steering knuckle question.

    I got the puller from eBay. Tolsen model 65042. I used it on my neighbors truck changing his Lowers also. It works perfect. No banging or cussing. Both sets were stuck and I made short work of them with my 1/2 impact.
Top