Correct me if I mis-read anything.
So the reason you want to delete the return line is because the return fitting is broken off the sending unit?
The TBI has a built in regulator, it is designed to operate with a regulator, and the pump may have a short life if it is run with a regulator that...
I put a steering stabilizer on my truck and it seems to help with bump steer. If you don't have any bump steer problems, I can't imagine you would see any difference.
A bearing on the fan started squealing and seized within about 10 miles and I had to go back to the clutch fan. I never actually got much chance to test it.
Finished up the roll bar structure
Made a proper exhaust to compliment my headers
With a set of KYB rear shocks installed, the suspension and chassis portion of this build is more or less wrapped up. Car handles super. Now it needs more power.:driver: L05 block, vortec rods and valetrain...
The exhaust I had built off the factory manifolds has to go now that I have headers. My first attempt was a set of homemade mufflers.
The header flange and a short section of tubing with the flex coupling is my "permanent" exhaust. Then there are V-band turbo flanges. The idea is that I can...
I've done a few things on the car, but with school starting I am a little bogged down. I couldn't get the oil pressure gauge in my Intellitronix cluster to work properly. I tried a new sending unit and everything, so I just got an auxiliary gauge to mount on an A- pillar gauge pod.
I cut a...
I haven't taken many pictures lately of what I have been doing, and I forgot what all I have done since my last update.
Coilover conversion on the front
Made a strut tower brace to go along with the coilovers. It has a sandwich plate on the strut tower and the firewall braces are spaced...