Recent content by un4givn85

  1. un4givn85

    Lets see some custom gauge clusetrs

    Dude that is awesome. Makes mine look boring.
  2. un4givn85

    Need some help with a no start problem

    Well, I got it running again, and I replaced the pump and filter for no reason. There was a wire coming off the distribution block on the firewall that had fried, like it disintegrated when I moved it, and it apparently is the power feed to the pump. So I ran a new in-line fuse holder with a 20...
  3. un4givn85

    Need some help with a no start problem

    OK, I am going to try to test the pump this afternoon, it's hard to find time during the week as we only have 1 vehicle so by the time I get home, I only have about 20 minutes before I have to go get my wife again, then dinner, then kids to bed, etc, etc....
  4. un4givn85

    Need some help with a no start problem

    Am I right in thinking that the ICM is ok if the truck starts for a bit when fuel is added directly to the throttle body?
  5. un4givn85

    Need some help with a no start problem

    I looked up where the ICM is located. Would that being bad stop the fuel pump from working? And would the truck run like it does with fuel being added directly if that was bad?
  6. un4givn85

    Need some help with a no start problem

    It fires when if I put some fuel in the TBI, it'll burn through that and die again. I can hear the fuel pump relay click on when I turn the key, does that help? What is the best way to provide direct power to the pump to test it? Where is the ICM located?
  7. un4givn85

    Need some help with a no start problem

    Hey guys, I am at my wits end with my truck not starting. It started Friday the 13th, go figure, I got home from work and it died right in my parking spot, and hasn't started since. It had started just fine at work and ran fine and started at the couple stops I made on the way home that day. So...
  8. un4givn85

    Idle issue.

    So how do I test if the one I had is still good, and for that matter how can I tell if it's OEM?
  9. un4givn85

    Idle issue.

    Yea, it's a Duralast, this one - https://www.autozone.com/emission-control-and-exhaust/egr-valve/duralast-egr-valve/182477_160301_0 I would've had to order an ACDelco, or pay a ridiculous price for one at Chevy. The Duralast was in stock. I tried cleaning the old one, didn't do anything.
  10. un4givn85

    Idle issue.

    My throttle does have that "neck snap" like response. I'll test out the IAC and the TPS. Thanks again for the help.
  11. un4givn85

    Idle issue.

    Got the new EGR in, idles much better, tho still stumbles a bit on occasion, but I'm pretty sure it did that before the really bad idle. This stumble is almost like a miss, but very random and sporadic. I'll see how it handles traffic tomorrow and report back.
  12. un4givn85

    Idle issue.

    Got home and pulled the vacuum line, idled perfect. I'll throw in a new EGR and see how she acts . Thanks for the tip.
  13. un4givn85

    Idle issue.

    Was this meant for this thread? I can get a video of the noise, but no one has mentioned an IAC yet.
  14. un4givn85

    Idle issue.

    hmm, so is something wrong with mine then? its pretty audible under the hood. dont hear it when its shut.
  15. un4givn85

    Idle issue.

    Hood up or down?
See more

Latest posts

Staff online

Members online

Total: 1,168 (members: 25, guests: 1,143)

Forum statistics

Threads
64,312
Messages
1,391,173
Members
51,393
Latest member
AndrizzyOBS

Share this page

Top