Recent content by Trstrugar

  1. Trstrugar

    TV Cable question

    I need to pull the bed off to do some proper welding on the exhaust and replace the filler neck anyway, I will definitely be replacing the fuel filter. I replaced the TPS and I wish I didn't because it didn't change anything. One of the screws connecting it to the throttle body was cross...
  2. Trstrugar

    TV Cable question

    That's really good information. I have always wondered which transmission I have. The guy before me claimed it was a 700r4, but I don't know how to tell the difference.
  3. Trstrugar

    TV Cable question

    My truck is a 1994 GMC k1500. My question is in regards to the TV cable. I have had idling issues with this truck since I got it, and I think I have narrowed it down to a poorly rebuilt TB. My truck seems to have delayed shifting, and it shifts mighty hard when it shifts normally. I messed with...
  4. Trstrugar

    Low idle/stalling new thread

    I never did solve this problem, I just have been running it as it is. Still throws a code for running lean. Next step is going to be to try and replace the throttle body. The guy before me rebuilt it himself and I'm not confident he put it together right. Also the connector for the TPS is...
  5. Trstrugar

    Brake Light Switch question

    My truck is a 1994 GMC 1500 4x4 5.7l. I recently replaced the brake light switch and it works, but i think i damaged clip that holds it on there. It will slide a little bit, and stop working. Im wondering if anyone has any tips on how to secure the switch tightly on there, or where to find a new...
  6. Trstrugar

    Low idle/stalling new thread

    I bought some lucas injector cleaner. Im going to run it through the tank and see if it helps. If not ill just take the injector out and clean it manually. The cover over the manual idle adjustment screw is really on there. I went at it for a little bit with a chisel and hammer and ended up just...
  7. Trstrugar

    Low idle/stalling new thread

    Also I had heard that a loose throttle shaft bore can do things like this, but mine seems to be tight. I did however notice that on one of the injectors spraying down the bore, is very faint and uneven compared to the other one. Wondering if this could cause weird idle problems or if the...
  8. Trstrugar

    Low idle/stalling new thread

    I'm not quite sure I understand that, you jump the terminals of the plug to the valve, or the terminals on the valve itself?
  9. Trstrugar

    Low idle/stalling new thread

    I didn't replace it the guy before me did. It looks brand new. I doubt that he did a re learn, I've never heard of that I thought you just plugged it in.
  10. Trstrugar

    Low idle/stalling new thread

    The IAC valve is new and the throttle body looked clean when I shined a light down it
  11. Trstrugar

    Low idle/stalling new thread

    I am going to take care of both of those things tomorrow and I'll let you all know how it goes. Can a bad EGR cause low idle? It's not intermittent it's constant. If I manually adjust the idle will it mess up my timing? Another theory I had was a bad ground somewhere if any of you have had...
  12. Trstrugar

    Low idle/stalling new thread

    I will give replacing those a try. Do you have any tricks for getting that one bolt off of the EGR in that inconvenient place?
  13. Trstrugar

    Low idle/stalling new thread

    Also I had a mechanic mess with it for a couple weeks, and he told me his money was on the computer needing replaced, but he couldn't verify it without sending it in
  14. Trstrugar

    Low idle/stalling new thread

    My truck is a 1994 GMC z71 1500 with a 5.7l and 700r4 tran. I am having low idle problems. The truck runs great when it's cold and first started up, voltage is at 14 and it idles normal. when in drive it will idle low, around 200. It gets worse after driving for about 20 minutes and it is fully...
  15. Trstrugar

    Truck will not start!

    You were absolutely right. After replacing the starter and it not working. I adjusted the ground cable to the block and it started right up
See more

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,699 (members: 57, guests: 1,642)

Forum statistics

Threads
64,455
Messages
1,394,424
Members
51,710
Latest member
nathanhryciuk46

Share this page

Top