Recent content by Szil66

  1. Szil66

    NV3500 Noise at high RPM

    Hey guys, I recently finished up my 5.3 swap. When I did the swap I also put in a rebuilt NV3500 due to a bad input bearing in my old one. Everything in the swap works right, trans shifts well, my only issue is that when I get to higher RPM it makes a ringing noise. Sounds like an old telephone...
  2. Szil66

    95 5.3 Swap wiring questions

    Hey guys, I know this is a subject that's been beaten to death but every swap in so different. I've searched and searched for answers. Anyways, over the weekend I got my old motor out and the new one in. I have everything on the motor wired and it runs very well. The only thing I need help on...
  3. Szil66

    Good Source for NV3500s

    Hey guys, I am going to be needing a new/rebuilt transmission and was wondering if anyone had any input as to where to get a new unit. I just had the transmission out this past weekend to replace the input bearing as I thought that was the cause of my problems, however upon removal I found the...
  4. Szil66

    Oil Pan Question

    I will be using Dirty Dingo plates and it will mount in the same spot as my current motor as to not need to modify the rest of my drive train
  5. Szil66

    Oil Pan Question

    Anybody? Just need a picture and some measurements!
  6. Szil66

    Oil Pan Question

    Hey guy, quick question for those of you that have done LS swaps. I am going to be doing a 5.3 swap in my pickup and though I know the truck oil pan will fit I have a different question. I am using a motor I had for another project that already has a CTS-v oil pan on it. I was just wondering if...
  7. Szil66

    TBI Crate Engine Questions

    Thanks for all the info guys. I was figuring I would have to worry about chips and what not. I think it's going to be smarter for me to buy a 5.3, cam it, and run with it. I appreciate the help
  8. Szil66

    TBI Crate Engine Questions

    I would have mine rebuilt, or even rebuild it myself but it's my only vehicle so I don't have time for the motor to be out getting machined and rebuilt and that whole whole ordeal. When looking at the cost to power ratio I may just look into doing a 5.3 swap. I have a 60 Bel Air that I swapped...
  9. Szil66

    TBI Crate Engine Questions

    Hey guys, I am looking at buying a crate engine for my pickup. I currently have 220k on my engine and its starting to get tired. It is my daily so I am leaning towards a crate engine for the sake of time. I am looking at this one from Five Star Engines, first off just wondering if anyone...
  10. Szil66

    Double DIN in 1999 Suburban

    So no need to move your heater controls? I have wanted to get a Double DIN stereo just never wanted to do the DetailSS way. Very interested in this! I think for $16 you cant really beat it!
  11. Szil66

    Modified and Rebuilt TBI now won't run

    That's what I would guess too.. the filter was really bad. I've only had the pickup a year and I kept meaning to change it, it just skipped my mind every time I was at the store getting other maintenance stuff. However, I'm not sure if the fuel pump has ever been changed and it has 217k miles so...
  12. Szil66

    Modified and Rebuilt TBI now won't run

    Dealership concluded that is was the fuel pump, was only pumping 5psi. I guess I've never heard of a fuel pump doing that, I figured it would either pump or it wouldn't pump. Also I was too caught up thinking it was because of something I did while rebuilding the TBI. Glad its fixed, thanks...
  13. Szil66

    Modified and Rebuilt TBI now won't run

    I replaced the fuel filter which was definitely passed due, however, it wasn't the problem. It could be my pump but I don't have a gauge to check it. I drove it again last night after replacing the fuel filter and there was no change, although my SES light didn't come on after driving it for...
  14. Szil66

    Modified and Rebuilt TBI now won't run

    Replaced the fuel pressure regulator today still no change. It only happens under loan, if it's in neutral and I rev it, it runs just fine. But when I start to let the clutch out and give it some gas it wants to cut out.
  15. Szil66

    Modified and Rebuilt TBI now won't run

    Nope, wires looks good, I just went out and pulled the air cleaner off and the riser and started it to watch the injectors and they both look like they are spraying well
See more

Latest posts

Members online

Total: 855 (members: 17, guests: 838)

Forum statistics

Threads
64,255
Messages
1,389,905
Members
51,249
Latest member
spoisel

Share this page

Top