Recent content by SuperSpore

  1. SuperSpore

    R4 Scroll Compressor Experience

    thanks to everyone that replied, very helpful :cheers: also: playingwithtbi - ill read through your wiring thread, thank you
  2. SuperSpore

    R4 Scroll Compressor Experience

    Thanks for the update... Is something like this what you installed? https://www.rockauto.com/en/moreinfo.php?pk=12710637&cc=1031184&pt=17507&jsn=981 That compressor in the link looks very different from the R4 pancake that comes with the early 90's. If what you installed looks like the pic in...
  3. SuperSpore

    R4 Scroll Compressor Experience

    Id be using this on a single cab. Any threads you can point to that would be helpful? I was looking at one of those GDP scroll compressor kits on RA that replace the old pancake on an early 90's, but it seems people don't like the scroll type either. (I don't know a lot about these compressors...
  4. SuperSpore

    R4 Scroll Compressor Experience

    I would be interested in trying this out. If I'm able to use adapters, etc. so I can use the existing R4 bracket... I'd definitely get a sanden to resolve this.
  5. SuperSpore

    Steering Pump Bleed Procedure?

    thanks for the heads up on this. I've always used the service manual method, but id rather do it the other way if it saves me a headache.
  6. SuperSpore

    AIR Injection needed for 88 K1500

    I went through this a couple of months ago when I was looking at an OBS that was for sale. I wasn't able to track any smog info through the vin. I think it really depends on your under hood emissions diagram sticker. (I refer to it as 'under hood' but it's normally on your fan shroud.) If you...
  7. SuperSpore

    AIR Injection needed for 88 K1500

    I try not to push my opinions on other people, but I would caution you to consider Playing with TBI's comment before you go out and buy a bunch of air system parts, assuming your truck is a 5.7 or 5.0. I am intimately familiar with two pre-94 5.7s that test & pass smog every 2 years in CA and...
  8. SuperSpore

    AIR Injection needed for 88 K1500

    CA does have their own, more expensive, catalytic convertors though. They check the numbers at every smog test in my experience.
  9. SuperSpore

    Shorty Headers

    This right here... for me it's worth it to avoid dealing with cracked manifolds, or worse... broken bolts in the head. Sometimes they shear off on their own, without the help of someone trying to remove them. Even if there was zero hp/torque benefit id still swap to shorties to avoid the...
  10. SuperSpore

    Shorty Headers

    Thats a nice pic. you would think they would come tack welded like this on the shorty headers with carb stamps, since they're intended for smog compliance... but it's easy enough to do if the hose clamp becomes an issue. :)
  11. SuperSpore

    Shorty Headers

    that's a good point... thanks
  12. SuperSpore

    Thread Locker

    So what's the conclusion here... I was about to use this (high temp thread sealant) on the oil pressure sender, with the assumption that it would not lock the threads anymore than the white permatex sealant would. Is there a reason I should be using the white sealant on the sender instead? (I...
  13. SuperSpore

    What is this?

    wow, that's lotto winning luck. not to sound cheesy but the truck can be replaced, your bodily parts would have been a bigger loss. getting another OBS is more fun when you're healthy. cheers :cheers:
  14. SuperSpore

    What is this?

    insane pics... hope you made it out uninjured, but that looks like it would have been difficult.
  15. SuperSpore

    Engine Ground Bolt

    :Big Laugh::cheers: Mostly yes
See more

Latest posts

Members online

Total: 1,083 (members: 10, guests: 1,073)

Forum statistics

Threads
64,562
Messages
1,396,660
Members
52,018
Latest member
bturner333

Share this page

Top