Recent content by run96k3500

  1. R

    2500 OBS to NBS Hub swap

    I thought the lower are from the HD kit doesn’t line up. And there are issues with the tie-rod end?
  2. R

    2500 OBS to NBS Hub swap

    ur right I think it’s a 2000 knuckle. I’m positive they can from a non-HD truck. That first link you sent is for 1/2tons I believe. But I can definitely check out the YouTube video
  3. R

    2500 OBS to NBS Hub swap

    I seems FullSizeChevy and Vortec454 are gone. I don’t have the details anymore around doing the hub swap. I have the 2002 no-HD front hubs but now no instructions. Anyone know where to find them?
  4. R

    Steering column cover

    I’m having trouble finding the replacement upper and lower steering column cover. Anyone know where to get them or have ideas on different options? Maybe the gmt600 covers fit?
  5. R

    96 K3500 454 coolant temp sensor

    I haven’t been able to locate the wiring diagram. So hopefully someone knows.
  6. R

    96 K3500 454 coolant temp sensor

    On my 96k3500 with the Vortec 454 is has a 1 wire coolant temp sensor on the driver and passenger side of the engine. Where done the passenger side sensor connect to? There have been a few owners of my truck and it seems that last owner did reconnect the passenger side sensor and cut the wire...
  7. R

    Temp sensor vs sender

    I’m needing to replace the 1wire temp sender on my 96 7.4l. The sender is a $25-$35 part. But a 2wire temp sensor is a $6 part. Is there a way to make that work? Sent from my iPhone using Tapatalk
  8. R

    Vortec 454 stumbling after sitting at idle?

    Issues with the tps? Intake gasket leaks??? Which is what happened to me. Sent from my iPhone using Tapatalk
  9. R

    Internal leaking intake manifold gasket, confirm my thought process

    Plus my manifold gasket blew out. Sent from my iPhone using Tapatalk
  10. R

    Internal leaking intake manifold gasket, confirm my thought process

    ****. My manifold blew out. It has a hole in it. I’m currently looking for a replacement. Also, I’m running a Whipple, so I’m trying to find something more sturdy than the plastic and rubber option. Sent from my iPhone using Tapatalk
  11. R

    Internal leaking intake manifold gasket, confirm my thought process

    How’s it going so far? It looks like that’s the rubber gasket that’s inlayed to a plastic housing? Not much different than the felpro Sent from my iPhone using Tapatalk
  12. R

    Vortec 454 Heater Core Bypass

    I always just kept my in the loop until it was winter. Mostly because the blend door flaps have a rubberized end that’s broken on pretty much every truck at this point. So I get a colder AC when the heater core is bypassed and looped Sent from my iPhone using Tapatalk
  13. R

    0411 swap issues

    Any chance your crate motor is a pos? Sent from my iPhone using Tapatalk
  14. R

    Pushrod problem

    Does this apply for the Vortec 454? Sent from my iPhone using Tapatalk
Top