RShrimp's latest activity
-
RRShrimp replied to the thread Axle yoke and seal.That yoke and seal has an updated version. Dorman makes it. For the 10 bolt the PN is 697-500. That gets you a new yoke, Seal, and the...
-
RYou want it to highlight his name like so: @NickTransmissions that way he'll receive a notification. Either that or quote him.
-
RRShrimp replied to the thread 700r4 no 4th gear after warmup.NickTransmissions (and Thank you!) Looking at Sonnax parts and see Oring style and OEM style Boost Valve and same for Reverse Boost...
-
RRShrimp replied to the thread 700r4 no 4th gear after warmup.Geometry is factory stock TBI so that not likely the issue. TV cable is new. Engine has the factory 210HP so I dont think the .422 is...
-
RRShrimp replied to the thread 700r4 no 4th gear after warmup.I am going to wait for Nick's reply but is that the parts that go in the same hole as the boost valve? Got PN#s?
-
ROof. Your pressure readings are lower than mine were. On Nick's recommendation I bought a new plunger and sleeve and it brought my...
-
RRShrimp replied to the thread 700r4 no 4th gear after warmup.Went to HF and bought a gauge yesterday evening. I did fix the TCC by installing a 4th only vacuum controlled lockup harness. (All the...
-
RSounds like you didn't follow a couple essential steps: TV Cable adjustment valiation via pressure testing and servo travel check to...
-
RI just did a Transgo Reprogamming kit on my 700r4. The trans was in good shape and worked in all gears (no Lockup but that's another...
-
RI got the Autometer one, #ATM-17101, and it had little push in pins that locked in place and were small and very tidy, just meant they...
-
RI didn’t want to see screws either so I glued it. FWIW, I got one of those GlowShift “Universal” mounts and should’ve known better. One...
-
RThe pillar one I had with my 95 pick up, it was screwed to the factory one. It came with screws and little black caps over the screw...
-
RTo anyone who has installed a 3 gauge Pillar mount. How did you secure it to the Pillar trim? This is a Universal Mount from GlowShift...
-
RRShrimp replied to the thread 700r4 VSS and speedometer.Reporting back again since there are questions. My speedo still does not work right. I pulled cluster and cleaned all the connections...
-
RRShrimp reacted to PlayingWithTBI's post in the thread Park Neutral switch 1990 with 700R4 Winters Sidewinder Shifter install. with
Like.
I'm using TunerPro RT for reading and modifying the .bin (AKA chip, EPROM, etc) on my laptop. That was a screenshot of a random .bin on...
Staff online
-
df2x44L60E Destroyer
Members online
- Johnniemustang
- jman2
- 90sprobs
- patrick5050
- Noobular
- ragingsalsa
- scott2093
- jus10inbrla
- tybcr783
- Grooter8824
- the_elegant_fox
- vince72
- danhouse
- Henrytounk
- Ryanstokes8
- 1998_K1500_Sub
- CaseIH
- EightOSix
- Joe Dirte
- konajoe
- Stumpy
- aaronb
- Nad_Yvalhosert
- df2x4
- SNCTMPL
- benpat
- 89chevy4scrap
- JDGMC
- Aarondash
- GunnyRob
- Carlaisle
- Holey-Noely
- DaHoe
- WAM62