Recent content by rlrudnik

  1. R

    99 escalade won't start, replaced crank sensor

    You're probably right with needing a new cam eventually. I'm going to go over the whole truck and end up putting a new frame under it over summer, so it will get a new one while the engine is out.. Just need it to make it till then as it is.. Damn near the whole truck is new and in good shape...
  2. R

    99 escalade won't start, replaced crank sensor

    Well cap was bad, rotor was bad, plug were bad and clearly the gear is bad.. Dropped it in and think I'm still a tooth off, but gotta go to work. But I'm off tomorrow so I'll get it running again. I've never seen a gear that bad before. Sent from my iPhone using Tapatalk
  3. R

    99 escalade won't start, replaced crank sensor

    Well the rotor didn't look great so I changed it, but in the process I was seeing how much play there was in the gear and it turned enough that i think it jumped a gear. And is Def off when I turned the key. So I'm thinking it just needs a new distributor at this point Sent from my iPhone...
  4. R

    99 escalade won't start, replaced crank sensor

    Ok I'll pull the cap in the morning. Thought I replaced the cap and rotor a few years ago, but can't remember at this point. Distributer is still firmly clamped in place so it hasn't moved. So even if the offset is off and not right where it should be it should still at least start right...
  5. R

    99 escalade won't start, replaced crank sensor

    She said the engine light was on.. Not sure how long, I don't drive it.. Happened Friday night and I went back to work Saturday morning so haven't had a ton of time to work on it. Was raining today but I figured crank sensor was easy swap if it worked and got it running, which it didn't. I...
  6. R

    99 escalade won't start, replaced crank sensor

    So the other night my gf was driving and the escalade shut off on her, I got there and wouldn't start, pulled the code and had a the p1345 and scanner said crank sensor. I replaced the sensor this morning and still won't start but doesn't sound as bad as before. I know you're supposed to do the...
  7. R

    1 ton denali dually build

    So the other day I stumbled across a 94 k3500 crew cab dually 454 5spd (told me synchronizers are starting to go) that needs work for a good price and said what the hell why not. The cab itself is pretty good rockers and cab corners but the front clip is damaged, seats are pretty beat and the...
  8. R

    What do do with airbags when going to a shop.

    Tuesday I'm dropping my escalade off at a shop to have the rear leaf hanger replaced since it rusted out and I don't have time to do it myself. I had put the firestone ride rite airbags on it because my leafs were wore out and sagged when towing and it was easier than replacing the leafs. Now...
  9. R

    4 hi mod problem

    I'll try disabling the drls and see what that does. I guess I just don't see how the fog light wiring is affecting anything since it's a different switch and not part of the new harness. But it's hard to say where all the factory wiring goes and what it's tied into I guess Sent from my iPad...
  10. R

    4 hi mod problem

    I did not disable my drls, maybe I should have. Right now I do not have the 4 hi relay installed, tried every possible configuration of switching wires around with the harness and had the same result. Then just for whatever reason I flipped my fog light switch off and they magically worked like...
  11. R

    4 hi mod problem

    Right now when I first turn the headlights on I have only low beam.. I turn the highs on and have only highs, but then I turn the highs off and all 4 are on Sent from my SAMSUNG-SM-G891A using Tapatalk
  12. R

    4 hi mod problem

    I removed the 4 hi and separated the grounds and still have the same problem. So it is happening in the harness somehow Sent from my SAMSUNG-SM-G891A using Tapatalk
  13. R

    4 hi mod problem

    I used both the harness and the 4 hi kit from lmc truck. Tapped into the factory wiring where it plugs into the new harness. I did tap the power and group for the 4 hi into the harness power and now that I think about it I grounded both the high and low beam lights to the same place and tapped...
  14. R

    4 hi mod problem

    99 escalade, did the heavy duty harness today along with the 4 hi mod. Working in the garage everything worked great. Tonight I went for a ride and now when I turn the high beams on they all 4 come on, but when i turn the high beams off they all 4 still stay on.. Anyone else have this happen...
Top