RDF1's latest activity
-
RDF1 replied to the thread Flywheel/flexplate identification?.It looks like a 4l60 LS flexplate. Whats that part number on it? -
-
RDF1 replied to the thread Dynomax universal ultra flow 17519.Ive used the 17233 along with a Vibrant resonator in a S10 with 5.3 and it was very nice and tame with a nice sound. I have the 17235...
-
RDF1 replied to the thread 4L80E swap?.Dont forget driveshaft yoke too
-
RDF1 replied to the thread Stock lm7 turbo build.I always use the MLS gaskets. Felpro or Cometics. And most turbo setups are Huron Speed or a home made system using factory manifolds.
-
RDF1 replied to the thread Stock lm7 turbo build.They always have those fronts and rear bolts broken off. I guess it's from thermal expansion over the years
-
RDF1 replied to the thread Stock lm7 turbo build.In the 20 years i been messing with these engines i think ive only gotten lucky 2 times with no broken bolts in the heads. I learned...
-
RDF1 replied to the thread Stock lm7 turbo build.I buy 100 of these at a time. Use them for everything and work good for exhaust manifold bolts. Pretty cheap too for a 10.9 bolt...
-
RDF1 replied to the thread Stock lm7 turbo build.The torque converter will make or break a setup. If you stay with the stock converter you will be sacrificing some of your 1/4 mile...
-
RDF1 replied to the thread Stock lm7 turbo build.I usually go for the 5.3s since they are half the price of the 6.0s here. And boost doesn't care about engine size. A 78mm turbo can...
-
RDF1 replied to the thread Stock lm7 turbo build.I agree @Drunkcanuk. Since the turbo setup will make more torque, use the higher gears to stay in the torque range longer and...
-
RDF1 replied to the thread Stock lm7 turbo build.It depends on the setup really. Ive never done 0-60 times but for drag racing and looking at 60' times along with 330' times ive had...
-
RDF1 replied to the thread Stock lm7 turbo build.For a turbo setup I always use 3.42s unless it has larger tires than 32".
-
RDF1 replied to the thread Big mother thumper cam in a 89 350 tbi, is it possible?.Would it work in the engine? Sure. But there are far better cams than that one.
-
RDF1 replied to the thread Stock lm7 turbo build.Id be willing to bet it has 3.42s since those were the most common. You can call a dealership with your VIN and ask for a part number...
Members online
- sikk84
- squirrels2k
- 4player
- Alexresuello
- StevenGomez123
- cdone
- 1500z71
- bassentx
- bscherer
- mechanixman
- Gumball
- sambuko
- PlacerGMT
- slow_c1500
- lamesmolden
- SKAREKRO13
- DonYukon
- Sideburnz
- calebsrepair
- Drunkcanuk
- RDF1
- Komet
- TroyMacDonald
- termite
- SAATR
- SNCTMPL
- solaralexx
- DMiner01
- kreeperthebro
- Bigz416
- JSquared81
- JBis
- Spenj0rk
- Aqua-pig
- IndexOf0
- texasil