Recent content by onelozu

  1. O

    In or Under the Bed

    I have all mine mounted under the bed,for me I like the idea of my truck being moveable with the bed off,I don't drive without it but if it's in the way I font have to worry about hooking air to it
  2. O

    Wheel spacing info for lowered trucks

    Not sure if its been covered before or not but I'm looking at a set of 22x9s and I'm wondering if they'll tuck,this thread says it needs to be +19mm or higher and the ones I'm looking at are +15mm will those 4 mm make that much of a difference when trying to tuck?
  3. O

    viair rebuild??

    The piston bolts to the shaft of the motor,and the cylinders slides over it,gotta cup the ring upward. Had a little phone conversation with viair earlier lol
  4. O

    viair rebuild??

    any one ever rebuilt a viair? I bought 2 blown 480s and 2 new pistons and 2 new cylinders. don't wanna mess up the new piston rings by shoving the cylinders on, anyone have any insight on how to do this?
  5. O

    96 sierra issues

    Okay so I just pulled the 350 out if my truck for a rebuild and stuck a 305 in for the meantime,gonna be slow on the rebuild so I'd like to drive it for now. I pulled the 305 out of my parts truck that I was driving for about 3 months,motor ran perfect to issues what so ever,so I swapped motor...
  6. O

    Show me your LED's!

    Didn't see it posted,but what bulb type the hvac controls take? What about the window switches and light switch?
  7. O

    Problem after problem

    All of that is new,but I'm just gonna bring it to a mechanic,gonna get it rollable and pull out my 15s amps and radio
  8. O

    Problem after problem

    hopefully someone still looks at this,truck started running real bad,like its starving for fuel,idles rough,and when your rolling and you punch it,it gets up then bogs down then gets up then bogs down,so trying to figure out what it is i notice i didnt hear the fuel pump,so i check all the...
  9. O

    Problem after problem

    Well,fuel pump finished going out last night,55psi wasn't good enough to start it,changed that,doing the filter tomorrow,gotta change the quick connect looking thing for the heater hose too,gonna prolly change the distributor soon too,just for the hell of it,then it'll be completely new fuel...
  10. O

    Problem after problem

    Ended up not being able to go,had a Funeral to go to
  11. O

    Problem after problem

    Thanks man! Going get new fuel line this weekend hopefully,and a set of bucket seats
  12. O

    Problem after problem

    Okay truck is back up and running,running damn good too! No fires and no leaks,not even from the hose,anyone know how much pressure runs through the return line? Also it's hesitant to start but it'll crank up
  13. O

    Problem after problem

    I went ahead and did it,just to be able to start it,I'm going to pull a part this weekend and I'll get the fuel line along with bucket seats hopefully
  14. O

    Problem after problem

    On second thought,does anyone see a problem with me cutting the metal line and slipping a rubber one on to get rid of the kink?? And put like 3 hose clamps on each side? We did that to an s10 once and it held up good
  15. O

    Problem after problem

    Well looks like I'm off to the junk yard again this weekend,need to get new fuel lines,these are linked up and the return line won't go all the way into the injector/:
See more

Latest posts

Members online

Total: 483 (members: 24, guests: 459)

Forum statistics

Threads
64,728
Messages
1,399,508
Members
52,305
Latest member
weatherman330

Share this page

Top