Recent content by NickG80

  1. NickG80

    Tire Poll

    I had mentioned the Falken tires earlier in the post. Now I own 2 sets and they are great we had our first snow and my wife even commented on how well they did. I’ve got a few thousand miles on my truck with them. They are quiet, great reactions, wearing great also. I did get 285’s the ride...
  2. NickG80

    newer wheels on older truck

    8 lug is the same 8x6.5 it’s basically the same on the all Chevy, dodge and ford except the stupid duties they went metric.
  3. NickG80

    4l60e 1-2 shift accumulator help

    Oh good call I forgot about the plastic ones.
  4. NickG80

    Roasted direct clutches in a 4L60e

    It’s been awhile since I updated this but it’s finished. If I didn’t buy the entire drivetrain out of another truck I would suspect I have completed this swap for $600, give or take. Very easy swap, driveshaft shortening is about all you cannot do at home in the drieveway, oh and pcm programming.
  5. NickG80

    Push button 4WD transfer case won't shift to 4HI/4LO

    Remove the tail shaft housing the snap ring is probably broken.
  6. NickG80

    14 bolt SF vs FF

    I like gaskets, pain to scrape off but you don’t have to worry about leaking cause you didn’t clean out he oil from the bolt holes. Just my .02
  7. NickG80

    96 Chevy K1500 4l60e Hard Shifting

    Have you checked pin figment? Possible loose terminals can cause intermittent issues, also I wouldn’t rely on that scanner either. Make sure you don’t have loose terminals also have you replaced the pcs? Check the connections in the transmission and the connections into the transmission.
  8. NickG80

    96 Chevy K1500 4l60e Hard Shifting

    Have you checked pin figment? Possible loose terminals can cause intermittent issues, also I wouldn’t rely on that scanner either. Make sure you don’t have loose terminals also have you replaced the pcs? Check the connections in the transmission and the connections into the transmission.
  9. NickG80

    4l60e 1-2 shift accumulator help

    Use air to blow it out, possibly the spring broke. It’s not uncommon.
  10. NickG80

    Rebuild or Replace 4l60??

    Just make sure you get the upgraded traction shell, do not reuse yours. Get a brushing kit, replace them all. Watch monster transmission videos they are pretty good, any questions just ask and submit pictures.
  11. NickG80

    Rebuild or Replace 4l60??

    No need to reprogram your pcm just need the pcm and prom from the donor truck you have TBI, 96 and up is where the programming and “hard stuff” come in. the swap isn’t hard I’ve done it now in my driveway. Would have been easier at work with my lift and tools, but due to construction and lack...
  12. NickG80

    STILL chasing hard start....

    Check the injector for leaks, fuel sitting in the intake can cause the same hard start issue, you almost have to clear flood it right off the bat.
  13. NickG80

    Roasted direct clutches in a 4L60e

    Transfer case inputs changed, transfer case in everything is finished but the cooler lines and rear drive shaft it’s 2” to long! Might get it started this weekend!
  14. NickG80

    Tire Poll

    I've always loved the BFG’s numerous sets in lots of different trucks. Got 60k off one set in my 96 back with the first KO. Now that I have a family BFG’s are out. Lot so of guys are running the new Falkens and getting great results off road and high mileage on road. Just my .02
  15. NickG80

    Rebuild or Replace 4l60??

    They aren’t hard to rebuild. You will need some special tools, the lip seals in the input drum can be a PITA. I took my 4l60e apart and decided to swap in a 4l80. I plan to tow a lot with this truck and I’m. It a fan of the programming/ logic GM used on these early 4l60e’s especially PWM torque...
See more

Latest posts

Staff online

Members online

Total: 550 (members: 32, guests: 518)

Forum statistics

Threads
64,757
Messages
1,400,017
Members
52,381
Latest member
rlee6427

Share this page

Top