Nick88's latest activity
-
I have a 1988 350 TBI vin K. Little back story, my old ECM was shot and wouldn’t recognize a faulty egr. I found the cheap egr I had was... -
Nick88 replied to the thread Important Wiring Question.Update! So I noticed yesterday the EGR was not working (It was the last duracrap part on my truck from Autozone so now all that cheap...
-
Nick88 replied to the thread Important Wiring Question.Could it possibly be the ICM 4 prong connector behind distributor? If the connector is worn or corroded would that be able to cause an...
-
Nick88 replied to the thread Important Wiring Question.I set timing to 0 and 2 independently when I replaced the distributor. The timing retarding isnt like a regular retard its very heavy...
-
Nick88 replied to the thread Important Wiring Question.I didnt ignore the help, I just firgured Id try it just in case considering it took me 2 minutes to do and 5 seconds to cut the wire and...
-
Nick88 replied to the thread Important Wiring Question.Alright, so I added a second ground point on the manifold off the esc and now i have code 43... I guess the esc is only supposed to be...
-
Nick88 replied to the thread Important Wiring Question.I just want to get the damn thing fixed, all my ignition parts are brand new it gets frustrating quick, im gonna try to add the second...
-
Nick88 replied to the thread Important Wiring Question.Ive been having an issue where when i start accelerating, the timing retards. So the truck ends up being completely dead basically under...
-
Nick88 replied to the thread Important Wiring Question.Im more concerned if the wire might have any breaks or chaffing inside the harness or hidden, and my opinion is extra grounding could...
-
Nick88 replied to the thread Important Wiring Question.Just out of curiosity, would there be any difference grounding it by tstat housing compared to other area closer to esc? just wondering...
-
Nick88 replied to the thread Important Wiring Question.I was just wondering because the ESC diagram from the manual doesnt look much like the one above my valve cover, I figured out blue for...
-
Nick88 replied to the thread Important Wiring Question.the bolt on the manifold to the right of harness next to the tbi in the picture is where I want to ground it. The esc wires are coming...
-
-
Nick88 replied to the thread Important Wiring Question.Also is it a bad idea to run a new ground to the manifold??
-
On my 1988 k5 Blazer 350 tbi i want to work on the esc to narrow down a timing issue, I want to rewire the ground of esc to manifold and...
-
Nick88 replied to the thread Good Scanner to Use??.1988 OBD1, I bought the Innova but returned it because no live data, but it said I have 11 codes (I don’t have SES on or any codes by...
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- docstoy
- skylark
- Caman96
- kennythewelder
- SNCTMPL
- 99xcss4
- EDNY
- L31MaxExpress
- reddman6891
- tnsirmans
- 454C2500Longbed
- Perk0905
- dubless
- Teddysvam
- Jairolua
- BeXtreme
- Changito
- Leal77
- theoneandonlywhytry
- the_elegant_fox
- packer0440
- wittensville
- caw_86
- Stumpy
- LTC_
- 1990Z71Swede
- scofo
- HoffmansHaven
- kdhs10
- 0xDEADBEEF
- Drunkcanuk
- chevyshaw
- HotWheelsBurban
- joeslack
- HartRod
- Zulu Kono
- GatlinB
- gswbbc
- Striker1423
- KMFA0214
- Ohdatsruben
- SUBURBAN5
- Drppdyllwrngr
- Kclevi
- hatzie
- OlSarge
- Tmags2271
- CumminsFever
- JoeHorton
- nickc2500