Recent content by Jack Schneider
-
1997 suburban rear seats in a 1992 c1500?
Fronts are gone already, I’m always too late hahaha. Thanks for the info- Jack Schneider
- Post #5
- Forum: OEM and Custom Interiors
-
1997 suburban rear seats in a 1992 c1500?
They are pretty interesting! Someone definitely liked those bikes- Jack Schneider
- Post #3
- Forum: OEM and Custom Interiors
-
1997 suburban rear seats in a 1992 c1500?
Found these at the JY today and my truck is grey/black with an orange stripe so they would fit perfectly but just didn’t know how well they might fit in a regular cab 1992 c1500. I’ve seen mixed answers… I figured at a minimum I would need to drill new bolt hole locations.- Jack Schneider
- Thread
- Replies: 4
- Forum: OEM and Custom Interiors
-
Reverse lights coming in only between park and reverse
Hey guys! I just acquired another GMT... it’s a 1990 K2500’HD’. It has a recently rebuilt 400 transmission but I can’t get reverse lights to come on when it’s actually in reverse. They’ll come on only when the gear selector is between park and reverse just before the tranny fully goes into...- Jack Schneider
- Thread
- Replies: 8
- Forum: Transmissions
-
Drivers side brake light is intermittent
This has been driving me nuts for over a year so I figured I would finally ask for some help... every light and function works great but the drivers brake light sometimes will decide not to work. I’ve fixed up the mess of wiring the P.O. Did, replaced all bulbs, replaced multi function switch...- Jack Schneider
- Thread
- Replies: 1
- Forum: Engine Performance + Maintenance
-
I. A. C. Torque spec
Hello! I FINALLY got the ac in my truck converted to R134 and it shakes pretty good at idle with it on so I’m going to replace the IAC and see if that helps. Does anyone know the torque for it? I know it’s 13ft lbs on a TPI engine but I wasn’t sure it would be the same for the TBI engine and my...- Jack Schneider
- Thread
- Replies: 2
- Forum: Engine Performance + Maintenance
-
What a $40,000 GMT 400 apparently looks like
best part is the description https://www.facebook.com/marketplace/item/2779243562168453/- Jack Schneider
- Thread
- Replies: 37
- Forum: Ebay / Craigslist Finds
-
Bad lock cylinder?
Seems like every month there's something new :33: Novembers issue, is that, intermittently, while starting the truck, the key gets stuck past accessory. So the engine starts fine but then wont go into gear, brake light turns on the dash and no power to windows or the radio. If it wiggle it for...- Jack Schneider
- Thread
- lock cylinder
- Replies: 1
- Forum: Engine Performance + Maintenance
-
Is this wire stock?
That ******* is probably what made the damn module go bad in the first place stranding me at wal Mart lol- Jack Schneider
- Post #5
- Forum: Engine Performance + Maintenance
-
Is this wire stock?
Thanks guys! Nasty wire has been cut off.- Jack Schneider
- Post #4
- Forum: Engine Performance + Maintenance
-
Is this wire stock?
I replaced the ignition control module and this yellow wire was connected to it somewhere, no idea how. I assume it’s a wire that was used when some idiot poorly installed a remote start years ago but before I removed it I just wanted to be sure.- Jack Schneider
- Thread
- Replies: 4
- Forum: Engine Performance + Maintenance
-
stuff that catches my eye
They had a 2009 that was cheaper than that ‘97 lololol- Jack Schneider
- Post #2,091
- Forum: Ebay / Craigslist Finds
-
stuff that catches my eye
Can someone tell me why this is worth 12.5k?! I actually drove by this and had to turn around to make sure I read it correctly. Looked it up and sure enough...- Jack Schneider
- Post #2,090
- Forum: Ebay / Craigslist Finds
-
stuff that catches my eye
Ohh yeah it does!!- Jack Schneider
- Post #1,996
- Forum: Ebay / Craigslist Finds
