Recent content by Gambles

  1. Gambles

    2 or 4 gauge from battery to fuse/relay center?

    nice, yeah i personally have 0 gauge, about to have to redo it once again, oof... alternator bout to move back to passenger side of motor got a lextech ac kit though so i will not melt in texas! mines 300 amp alt with 0 gauge all the way to the bed, then i have 4 gauge pushed to a bus bar...
  2. Gambles

    2 or 4 gauge from battery to fuse/relay center?

    4g fits perfect, no loom
  3. Gambles

    2 or 4 gauge from battery to fuse/relay center?

    knuconceptz is my go to for wiring, I believe 4 gauge is what i had that fit in the shroud channel, with split loom and it fit great, will check pc later and see if i have any pre ls motor pics. I second that 100’ rolls comment, saved me money over all and you can cut exact lengths with very...
  4. Gambles

    High beams only

    Did you buy a harness that tied them all in or what? There should be 3 relays somewhere near it. one that feeds lows, one that feeds highs. then the last one which, with high beams it also pushes through triggered by the highs and does a relay pass through to still energize the low beams... you...
  5. Gambles

    disable window auto down

    anyone have any idea how to disable the factory auto down function?
  6. Gambles

    custom parking lights?

    I didnt get a chance to rig them all up at once the middle one is pretty bright. I have already deleted my outside blinker, and was my considering that also if you couldnt tell it was blinking! got some stuff to do before i head to work tonight, but ill be checking it out tomorrow afternoon for...
  7. Gambles

    custom parking lights?

    yeah i was having same thought, i sit really low, and they are floods, i looked at them point blank and they aren’t too bad.. hoping it wont be an issue
  8. Gambles

    custom parking lights?

    was thinking about trying something different, very rough outline, gonna try to get someone to cnc me something a little more rigid, but needed something to show, i made it with a die grinder and a pair of tin snips so dont get all critical on the lines not being perfect... but what are your...
  9. Gambles

    ls swap power steering lines

    can anyone post a pic of their powersteering lines? switched jobs and went to working 60-80 hours a week and had the money but not the time and got a guy to knock out ls swap for me, not sure if he made new powersteering lines because its got like an adaptor goin on but it like loops up ans now...
  10. Gambles

    Soft shifting 60e

    Yeah, I was hoping to not go that route from what I hear it’ll slow ya down some because ratio and weight. But seems to be the only option at this point if I can’t figure out what’s going on, damn shame it’s slipping with 6 miles on it..
  11. Gambles

    Soft shifting 60e

    Truck just got ls swapped, stock 5.3 with a fresh 60e dude drove it 30-45 minutes no issues, test drives it again 10 minutes while I’m driving to pick it up, shreds 3-4 clutches at like 48% throttle.. trans was built less then 5000 miles ago with a 5.0 on It, wonderful stiff shifts. so I have it...
  12. Gambles

    Looking to add power windows & locks to my '89. Is it do-able?

    Everything should be pretty straight forward, you really just need power ground and switch 12, you would be better off rolling the dash forward and just running the wires along the top, you don't have to pull it completely, I actually went back and added another multi conductor wire behind the...
  13. Gambles

    Hot 355 suggestions

    Yeah it's far from dd, but my no means is it going to be a track car, it might see one occassionally but I'm not trailering it anywhere. and I recall him saying it should turn over 6k no problem, I'm not looking for dyno numbers I really don't care as long as it runs good, I figure with some...
  14. Gambles

    Hot 355 suggestions

    Yeah, i dont honestly know the specs are on the cam, I was looking at a circle d with about 2800-3200 stall that's what he had written down it needed, tranny man gave me a break down of the parts list, back then and my other tranny from work said they were all good parts and he would have gone...
  15. Gambles

    Hot 355 suggestions

    I think someday is already I can't bring myself to even post it. I know it doesn't need to go in the truck for emissions reasons but I'm still thinking finishing building it.
See more

Latest posts

Members online

... and 35 more.
Total: 1,966 (members: 85, guests: 1,881)

Forum statistics

Threads
64,510
Messages
1,395,543
Members
51,861
Latest member
dadlyf3

Share this page

Top