Alright throttle rebuild is coming up in the next week or so. Wife opened up the bank enough to order some parts lol.
So I was looking at rvmorsemachine.com and marine-performance-parts.com for there TBI parts and am a little curios about their power plate and there TBI injector spacing and...
Okay iv'e heard about the about the adjustable fuel pressure regulator. is there a certain brand or someone who sells them that I should check out?
I'll probably take it apart this weekend and rebuild it and see if that helps. if nothing else it'll probably help my mpgs a hair.
Talked to my buddy, who's a Lexus mechanic, and showed him the wiring diagram. And what he told me the probably a wiring problem like
L31MaxExpress said it was. Only problem is that you have to be going 20 mph for it to happen and I'm not too keen in testing voltages as I'm driving. I am...
Replaced the fuel filter and got about an extra pound in pressure. It now sits around the 12 psi while driving which should be fine for the entire throttle range correct?
It's still bogging down in first gear though so I'm thinking it has to be some sort of sensor or controller shutting off the...
I did not, however I did hose it down with brake cleaner and gave it a good blast of air. the tank is also spotless so I doubt it any contaminants in the system.
I still don't think it has anything to do directly with the fuel pump its self do to the fact that it runs fine and only does it in...
Its a 91 350. Basically bone stock however, I have rebuilt the TBI along with some of the ultimate TBI mods it a few years ago. It is running between 10-12 psi while running, edging towards the lower end of the spectrum while driving. I did replace the fuel filter, but that was probably two...
Edit
Another note is it only happens from a dead start, as in you floor it from a dead stop. I don't like doing that to the old girl but there are times you have to get out of the way and stalling in the middle of the road doesn't help.
Hey everybody!
Due to the terrible nature of things going on I have been labeled non-essential and have been laid off.
But never the one to sit on my butt, I decided to work on the old girl dealing with one of the most annoying features of the truck.
It has a tendency to, when warm, bog down...
Would anyone know of a good way of installing some oh crap handles on a regular cab? I got some maroon ones from a Tahoe and I was wondering if a sheet metal screw would be able to hold the weight of me or anyone Really leaning on them. I was considering using one of those nut cert type deals to...
Really good write up here .
http://www.chevytalk.org/fusionbb/showtopic.php?tid/258416
I actually just recently had mine go bad. Kinda similar symptoms. However no matter what, it would run terribly. First start, 1 mile, or 10 it wouldn't change. It's a cheap thing to fix and a pretty easy...