Dajain's latest activity
-
DDajain replied to the thread All this work to get it right and it's still a work in progress....What's next?.I'm not quite sure how the coolant leak, which I fixed, is giving me any ideas on the shifting issue with the 4L80e. :(
-
DDajain replied to the thread All this work to get it right and it's still a work in progress....What's next?.The QD for the heater core hose is between the TBI and the distributor and is threaded into the intake manifold. This video is the 5.7...
-
DDajain replied to the thread All this work to get it right and it's still a work in progress....What's next?.I haven't done a bleed down test yet and I'm not planning on pulling the heads or the intake unless I have to. With mileage unknown, We...
-
DDajain reacted to GoToGuy's post in the thread All this work to get it right and it's still a work in progress....What's next? with
Like.
You have total compression test high pressures. Then you have differential compression test to identify worn out areas, rings, valve's... -
DDajain replied to the thread All this work to get it right and it's still a work in progress....What's next?.You must be one of the lucky ones where the coolant hasn't started to leak yet. lol The connection I'm talking about is the coolant...
-
DDajain replied to the thread All this work to get it right and it's still a work in progress....What's next?.1. The fuel pump is new and is putting out 36 psi at any given point. This makes me question the pressure regulator. Maybe it is faulty...
-
DDajain reacted to GoToGuy's post in the thread All this work to get it right and it's still a work in progress....What's next? with Like.
In this truck, a tow dually? What model engine? Stock 91 454 ? Big block uses higher fuel pressure than small block TBI. What year is...
-
DDajain reacted to Schurkey's post in the thread All this work to get it right and it's still a work in progress....What's next? with Like.
The universal three recommendations: 1. Verify fuel pressure at prime, and under load. 2. You've already handled the usual "tune-up"...
-
DDajain posted the thread All this work to get it right and it's still a work in progress....What's next? in Engine Performance + Maintenance.Hey guys and gals! OK, I have done so much to this truck and she still has a miss, problem shifting and really lacking power. 1991...
-
-
DDajain replied to the thread Where to get a VIN label?.I found a company which will print up a new label but they need a copy of the original. Does anyone have a K3500 with the 10,000 lb...
-
DGood Morning Guys! I have this 1991 K3500, which is a tow truck. Where I live, part of the tow truck inspection is the GVW must be...
-
DDajain replied to the thread Can't find the right parts diagram or parts number. :(.Wrong!!! That spacer did NOT come with that kit. Only the gaskets that go below and above the spacer. No spacer is included with the...
-
DDajain replied to the thread Can't find the right parts diagram or parts number. :(.For some reason, My local NAPA had a hard time finding a kit for this TBI. After a little searching, I found the one for my truck. It...
-
DDajain replied to the thread Can't find the right parts diagram or parts number. :(.Sure does....At least the parts that I have left do. haha
-
DDajain reacted to fancyTBI's post in the thread Can't find the right parts diagram or parts number. :( with Like.
Sounds like an injector pod spacer almost...
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- Road Trip
- kennythewelder
- 99xcss4
- 90somethinchevy
- johnny_162
- Gotcrits
- Bran505
- kamok1500
- Alteca
- Anchor
- Danimal08
- Bluetieguy53
- BonestockK1500
- Dericklp
- elijahf
- Drunkcanuk
- Carlaisle
- 4x4animalstyle
- Gezrcrew0406
- Erik the Awful
- Olemus14
- alabbar
- jeepguy
- L31MaxExpress
- jigsaw
- tj1989
- Polo1986
- HotWheelsBurban
- gun4hire
- Nad_Yvalhosert
- CombatWombat
- vince72
- Slammed92
- eskie12
- chentecruz
- jus10inbrla
- Chevyman1969
- 99Yak
- IcicleDBR
- Komet
- rudyleyvas86
- goodspeed
- Connorpod
- skylexmom
- Paul bunion