Recent content by Cody

  1. Cody

    Knuckle lift offset question

    Anyone running a knuckle lift? Trying to figure out what offset backspacing I need. I want to run 35 x 12.5. Have a RCD lift which increase my track width 2" and now my control arms and running my sidewall.
  2. Cody

    88-98 Bucket seat alternatives

    The brown wire needs to be connected to 12V+ ignition source to power your heated seats
  3. Cody

    Reallift Torsion Bar Relocator Poll

    I'd be interested in buying a set if anyone's making them
  4. Cody

    Vortec harness on a tbi

    Been searching for a 2 door tahoe/yukon vortec without much luck, just wondering what it would take to convert a 93-95 I'm planning on running a l31 with tpi and a 411 pcm
  5. Cody

    95 HVAC Controls

    You don't say
  6. Cody

    95 HVAC Controls

    Is there anyway to ensure the part I order is the 96-98 with the adaptor harness and not the 95?
  7. Cody

    95 HVAC Controls

    Does anyone know where to buy the adaptor harness to run the 96-98 HVAC controls or how to rewire the harness to work? I did the double din upgrade last summer and the 95 HVAC controls aren't holding up well to the modifications needed for fitment.
  8. Cody

    Does anyone have the HD headlight harness instructions?

    I ordered the harness from Mean Green and three months after it was paid for it finally arrived. Unfortunately I misplaced the installation instructions and once again haven't received any replies from Baron, on this forum or email or thru his eBay account. If anyone could please forward me the...
  9. Cody

    Taillight malfunction, Need Help!

    So heres the deal... I have a 95 Chev K1500 when the headlight switch is set to off the brake lights and rear signals work fine, unless I press the brake pedal when I have the signals on at which point I get a rapid flash up front and a very faint blink in the rear. If i turn the headlight...
  10. Cody

    7.3 swap questions

    I've been looking for a 12v for a swap into my 95, however locally a 2000 7.3 just became available for $1000, far cheaper than I can find a cummins for. Has this swap been done before? Will it fit?
  11. Cody

    Demand for a 1.25" Lift

    The pole should state a 1.25" kit, not a 1.5" If a moderator reads this could the typo please be corrected.
  12. Cody

    Demand for a 1.25" Lift

    Due to costs of ensuring every part made is certified, the likeliness of building 1" and 1.5" variants may not be applicable. Although the designs will be reviewed to see if we can manufacture the kit to accommodate the different sizes. Research is being done on flipping the rear bumper brackets...
  13. Cody

    1 1/4 Body Lift

    Pricing will be posted as soon as possible. Rest assured and this will be a high quality kit, with a affordable price. Please post any ideas or questions you may have. I have started another thread with more pictures and a poll, please take a look...
  14. Cody

    Demand for a 1.25" Lift

    I appreciate the responses received in my last thread, however with well over 500 views and only 18 replies I wanted to establish a poll to make it more convenient for members to express their opinions. The pictures below show the 1.25" body lift as well as 2" rear blocks with torsion...
  15. Cody

    1 1/4 Body Lift

    Some sneak peaks of the kit coming together, more too follow.
See more

Latest posts

Members online

... and 12 more.
Total: 1,411 (members: 62, guests: 1,349)

Forum statistics

Threads
64,337
Messages
1,391,534
Members
51,442
Latest member
4drspeed

Share this page

Top